C-Line 3D CNC Portable Coordinate Measuring Machine (CMM) designed for the Workshop

TRIMOS 3D I C-LINE PORTABLE COORDINATE MEASURING MACHINE

The C4 has 4 axes motorized (X, C, Z, P), it allows high performance measurements in 3D. Its special probing module, equipped with a vertical and horizontal stylus, considerably increases the possibilities of measurement, notably reducing the repositioning of the measurand. The C4 is equipped by default with a lithium-ion battery system, which gives it an autonomy of min. 4 hours under normal conditions of use. Moreover, in addition to a wired Ethernet connection, the C4 can be equipped with a Bluetooth or Wifi wireless device and thus offer a complete autonomy. Its lighter weight of 13.5 kg...

TRIMOS 3D I C-LINE PORTABLE COORDINATE MEASURING MACHINE COMPONENTS AND ACCESSORIES Accessoires Standard delivery C-LineCNC CMM Probe module type TP20 (M2) special C-Line, with vertical and horizontal probes 0 2 [mm] Calibration sphere Charger with power supply Protective cover Shipping box and inserts Trimos Calibration Certificate Ethernet, Bluetooth or Wifi adapter Probe module type TP20 (M2) special C-Line, with vertical and horizontal probes 0 1 [mm]. Probe module type TP20 (M2) special C-Line, with vertical probe 0 2 [mm]. Probe module type TP20 (M2) special C-Line, with horizontal probe...

5.TECHNICAL SPECIFICATIONS Working volume MPEe Fixturing accuracy requirement Machine speed Machine air requirement Construction Machine power requirements Autonomy Power consumption Manual motion control Probe Type Relative Humidity (operation and storage) % User controlled to 150 None required Stainless steel for all structural components 100-240 V AC± 10%, 50-60Hz Normal: 4 /peak: 3 Normal: 10 / Peak 15 User controlled by hand movement of probe Onboard PCB provides motion control, error mapping, I++ interface and ControlCAT metrology software Renishaw TP20 probe 13.5 (30) Specifications subject...

TRIMOS 3D I C-LINE PORTABLE COORDINATE MEASURING MACHINE SOFTWARE The C-Line works with the following softwares Aberlink, CMM Manager, Verisurf, PolyWorks.. Aberlink 3D Measurement Software It corresponds to the software used with the TRIMOS 3D product family. Aberlink's philosophy is to facilitate measurements. The Aberlink 3D software was written to set the industry standard for easy-to-use software. Designed around a graphical interface, Aberlink 3D can work in 2D or 3D, on manual or CNC CMMs and is equally at home when used with either touch, scanning or vision systems.

The CAD Comparison module gives the capability to compare measured points to a CAD model. This is the best way to measure complex geometries, or to inspect parts for which drawings do not exist. This module allows the generation of measurement programs from a CAD model (.step, .iges) without physically needing the part. Instead of taking measurement points on a component, you can simply click on the surface of the model where you want the points to be taken.

TRIMOS 3D I C-LINE PORTABLE COORDINATE MEASURING MACHINE www.trimos.com 750 02 0083 03 - Version 1.5/2022-09 - Changes without prior notice