QLEVER Ceramics
3Pages

Data management software QLEVER Ceramics QLEVER Software for ceramics industry QLEVER Ceramics is the new software developed by TMI ORION to fulfill the needs of the ceramic industry. It takes into account the specificities of the kiln, carts and potentially dryers. Basic functionalities Programs and reads the logger Analyzes the data Exports the data to an .txt file Minimum, Average and Maximum values of every channel Quartz inversion slopes Time at temperature Slopes calculation at any point Rise and fall values Real time data using the RF loggers Kiln and Pushing process description Description of oven and wagon: length of the oven, number of pushes, duration and length Insert a picture or a scheme of your oven Load description and thermocouples positioning in 3D Load description: type and number of products, thermo couples positioning either on different views (3D view available) or on a picture.

QLEVER Ceramics Incident and variable push rate Position of different elements such as fans, burners…inside the kiln, and relative scheme with distances Manages pushes and incidents with a variable push rate, so the software takes into account any change in the push rate due to an equipment failure or an incident while recording the data. You can mention the cause if you know it in the comment part. Kiln setting

QLEVER Ceramics Graph analysis and temperature mapping The results given by the logger are linked to the kiln settings. The kiln scheme is set up below the kiln profile graph, so the user can know at the same time the temperature of the product and its relative position in the kiln. Maximum and minimum temperature per channel and the time they were reached G Graphic features such as zoom, zones, automatic scales… G Snapshots to paste the curve onto a report G QLEVER Ceramics displays the heating and cooling at each thermocouple located on the load through all the process in the kiln. A...