Data sheet TMI-Orion PicoVACQ Temperature Temperature measurement in thermal processes from -70°C to +140°C PicoVACQ Temperature is a very small data logger for temperature measurement. It can be equipped with one or two platinum sensors, at the end of rigid, semi rigid or flexible probes. METROLOGY Operating range -45°C to +140°C -45°C to +85°C PicoVACQ Temperature ± 0.1°C from -70°C to +140°C (+/- 0.05°C upon request) Except for the PicoVACQ 1Tdi: ± 0.5°C from -70°C to +140°C PicoVACQ Long Temperature (*) The specified uncertainties correspond to two standard deviations. The uncertainties are calculated taking into account the various significant error sources, including the calibration probes, the equipment, the environmental conditions, the influence of the logger, repeatability, etc… TMI-Orion PicoVACQ Temperature Each logger can be calibrated and adjusted at the temperature points co

• Start set up: immediate or delayed • Battery level alert with Qlever software • Time stamped measurement data (1) The choice of the sensor depends on the application, ask our Sales department. (2) Non watertight models must not be immersed or used inside autoclaves. (3) The Teflon®PFA flexible probes of the Td models are watertight. DO NOT immerse in oil or ethanol, it would deteriorate the probes and make them non watertight.

technical specifications Material (**) The battery life decreases significantly below ambient temperature and becomes very short close to 0°C. In applications below ambient temperature, we recommend that you use other battery models or check that the application is compatible with the battery type.

technical specifications Temperature sensor PicoVACQ Long 2Td with Teflon® PFA probes PicoVACQ 1Td with a threaded semi-rigid probe PicoVACQ 1Tdi with an interchangeable Teflon PFA flexible probe PicoVACQ microwave shield PicoVACQ microwave bullet PicoVACQ 1Tc, battery with a thread

AutonomY The PicoVACQ Temperature is powered by a battery pack; its autonomy depends on the environment and the operational conditions of the application (temperatures at both ends of the mentioned operating range, data acquisition rate). Please contact our sales department to optimize the choice of the battery pack according to the temperature of your application. As a result of the variety of environments and operational conditions, TMI-Orion does not guarantee the battery lifetime and recommends that the user determine the battery lifetime according to his own process conditions and experience....