DATA SHEET TMI-Orion NanoVACQ Humidity and Temperature FullRadio Real time and wireless simultaneous measurement of relative humidity and temperature inside processes NanoVACQ Humidity and Temperature is equipped with 1 relative humidity sensor and up to 2 temperature sensors on the same logger. The various NanoVACQ Humidity and Temperature models are described below and can vary by number and type of probes, operating range and battery pack capacity. NanoVACQ Humidity and Temperature FullRadio is equipped with a 2.4 GHz radio transceiver as the unique communication interface. In addition to its data logger functionalities, it is designed for remote set up and radio data transmission, in real time or after the fact, through a TMI-Orion radio transceiver connected to a PC. The PC is equipped with Qlever software for logger setup and process data collection, management and display. metrology Humidity operating range Each logger can be calibrated and adjusted at the temperature points corresponding to the user’s needs. *The specified uncertainties correspond to two standard deviations. The uncertainties are calculated taking into account the various significant error sources, including the calibration probes, the equipment, the environmental conditions, the influence of the logger, repeatability, etc... TMI-Orion NanoVACQ Humidity and Temperature FullRadio

functions • Radio set up, start and reading of data • 2.4 GHz bidirectional radio communication • Radio transceiver set up: transmission duration and rate (1 per hour to 1 per second) • Start set up: immediate or delayed • Memory set up: stop at maximum capacity or loop writing • Real time or after the fact radio data transmission • Time stamped measurement data • Battery level alert with Qlever software * Internal platinum temperature sensor for pressure sensor compensation **Thls data logger is not watertight TMI-Orion NanoVACQ Humidity and Temperature FullRadio

technical specifications Material (*) A preliminary testis recommended to validate the hertzian transmission In the user’s application. Examples of NanoVACQ Humidity and Temperature models TMI-Orion NanoVACQ Humidity and Temperature FullRadio NanoVACQ HT-Td FullRadio

RADIO-FREQUENCY COMMUNICATION • 2.4 GHz ISM band (frequency range 2.405 GHz to 2.475 GHz) / Can be used without license / Universal band for industrial, scientific and medical devices with low radio transmission power / Maximum radiated power +5 dBm (3,2 mW). TMI-Orion 2.4 GHz bidirectional radio protocol, based on IEEE 802.15.4 standard / 14 RF channels for the user / Able to manage several pieces of equipment connected in star configuration in the same space. Radio transmission range depends on the environment. Autonomy The NanoVACQ Humidity and Temperature FullRadio is powered by a battery...