DATA SHEET TMI-Orion NanoVACQ Flat Temperature Flat data logger for temperature validation inside cans, pouches, trays, containers, autoclaves, pasteurizators, ovens, dryers... NanoVACQ Flat is a temperature data logger watertight under pressure up to 10 bar. Its compact dimensions are an asset for temperature measurement inside small containers: the logger body remains outside, avoiding thermal mass. The NanoVACQ Flat Needle model can be used with a temperature sheath and a thermowell (diameter 4 mm). This device is recommended for use in high pressure and for tight positioning in the container. The temperature sheath is placed inside the container before filling and sealing. A thread and an o-ring ensure positioning at the cold point and watertightness. After sealing, the logger is screwed into the sheath. This device can be adapted to various can dimensions and needle lengths by simply using spacers. Each logger can be calibrated and adjusted at the temperature points corresponding to the user’s needs. *The specified uncertainties correspond to two standard deviations. The uncertainties are calculated taking into account the various significant error sources, including the calibration probes, the equipment, the environmental conditions, the influence of the logger, repeatability, etc... • Start set up: immediate or delayed • Time stamped measurement data Memory set up: stop at maximum capacity or loop writing • Battery level alert with Qlever software TMI-Orion NanoVACQ Flat

technical specifications Model different probe sizes TMI-Orion NanoVACQ Flat Positioning kit for NanoVACQ Flat Needle: Temperature sheath kit and spacer T 0/DS/080105.ed4

Autonomy The NanoVACQ Flat is powered by a battery pack; its autonomy depends on environment and operational conditions of the application (extreme temperatures, data acquisition rate). As a result of the variety of environments and operational conditions, TMI-Orion does not guaranty the battery lifetime and recommends that the user determine the battery lifetime according to his own process conditions and experience. Software and related products NanoVACQ Flat is used with Qlever software. Qlever software platform: data acquisition, management and visualization of data from TMI-Orion data loggers....