NanoVACQ Ex
3Pages

DATA SHEET NanoVACQ Ex ATEX COMPLIANT Measurement of temperature, pressure, humidity in explosive environments. NanoVACQ is a family of data loggers measuring temperature, temperature and pressure, or temperature and humidity during thermal processes. Some models are ATEX compliant and are used in explosive environments, such as ethylene oxide sterilization validation. Compliant with the following regulations: EN 60079-0 and EN 60079-11 Marking: II1G Ex ia IICT3 Ga Each logger can be calibrated and adjusted at the temperature points corresponding to the user’s needs. *The specified uncertainties correspond to two standard deviations. The uncertainties are calculated taking into account the various significant error sources, including the calibration probes, the equipment, the environmental conditions, the influence of the logger, repeatability, etc...

• Start set up: immediate or delayed • Memory set up: stop at maximum capacity/loop writing technical specifications Time stamped measurement data Battery level alert with Qlever software Temperature sensor Pressure sensor Humidity sensor Temperature Probe dimensions Probe dimensions

Autonomy The NanoVACQ Ex models are powered by a battery pack; their autonomy depends on environment and operational conditions of the application (extreme temperatures, data acquisition rate). As a result of the variety of environments and operational conditions, TMI-Orion does not guaranty the battery lifetime and recommends that the user determine the battery lifetime according to his own process conditions and experience. Software and related products NanoVACQ Ex models are used with Qlever software. Qlever software platform: data acquisition, management and visualization of data from...