High-T-Dry
3Pages

DATA SHEET TMI-Orion High-T-Dry Temperature and shrinkage data logger The High-T-Dry is an autonomous data logger equipped with a temperature sensor and a rectractometer. It is made in two parts, the logger and the sensor plate, linked together by a high-temperature cable: • The sensor plate contains a temperature sensor and a retractometer fixed to a metal plate which can withstand temperatures up to +250°C. The High-T-Dry correlates the air temperature changes with the shrinkage of bricks during industrial drying. It also enables the acute evaluation of drying within two parts of the same brick or tile. Each logger can be calibrated and adjusted at the temperature points corresponding to the user’s needs. (*) The specified uncertainties correspond to two standard deviations. The uncertainties are calculated taking into account the various significant error sources, including the calibration probes, the equipment, the environmental conditions, the influence of the logger, repeatability, etc... TMI-Orion High-T-Dry The logger contains the electronics and a user-replaceable battery pack. It can be exposed to temperatures not exceeding +125°C. It is equipped with watertight connectors and can be immersed in a water thermal shield.

• Start set up: immediate or delayed • Time stamped data • Memory set up: stop at maximum capacity or loop • Battery level alert with Qlever software TMI-Orion High-T-Dry

Autonomy The High-T-Dry is powered by a battery pack; its autonomy depends on the environment and the operational conditions of the application (extreme temperatures, acquisition rate). As a result of the variety of environments and operational conditions, TMI-Orion does not guaranty the battery lifetime and recommends that the user determine the battery lifetime according to his own process conditions and experience. Software and related products The High-T-Dry operates with Qlever software platform. Qlever software platform: data acquisition, management and visualization of data from...