DATA SHEET CeriDry Temperature, humidity and shrinkage data logger Monitor temperature, humidity and shrinkage in drying processes of bricks, tiles and ceramics. CeriDry is an autonomous data logger equipped with It also enables the acute evaluation of drying within two one temperature sensor, one humidity sensor and one parts of the same brick or tile. rectractometer. This data logger correlates the changes in relative humidity and air temperature with the shrinkage of bricks, tiles or ceramics during the drying process. Each logger can be calibrated and adjusted at the temperature points corresponding to the user’s needs. (2) The specified uncertainties correspond to two standard deviations. The uncertainties are calculated taking into account the various significant error sources, including the calibration probes, the equipment, the environmental conditions, the influence of the logger, repeatability, etc... • Start set up: immediate or delayed • Time stamped data Memory set up: stop at maximum capacity or loop writing • Battery level alert with Qlever software TMI-Orion CeriDry

technical specifications Material The CeriDry is powered by a battery pack; its autonomy depends on environment and operational conditions of the application (extreme temperatures, acquisition rate). As an indicator, for an industrial drying process of ceramics, bricks or tiles, autonomy is 800 hours at 140°C with an acquisition rate of 1 acquisition every 10 seconds. As a result of the variety of environments and operational conditions, TMI-Orion does not guaranty the battery lifetime and recommends that the user determine the battery lifetime according to his own process conditions and experience....