DATA SHEET Monitor temperature, humidity and shrinkage in drying processes of bricks, tiles and ceramics with a data logger in two parts for a perfect flow of the hot air. This solution is designed for the drying of hollow bricks, but can be used in other drying processes. The CeriDry Split is an autonomous data logger equipped with one temperature sensor, one humidity sensor and one rectractometer. This data logger is made in two parts: the retractometer is separated from the temperature and humidity data logger by a high-temperature cable. The CeriDry Split correlates the changes in relative humidity and air temperature with the shrinkage of bricks, tiles or ceramics during the drying process. It also enables the acute evaluation of drying within two parts of the same brick or tile. Each logger can be calibrated and adjusted at the temperature points corresponding to the user’s needs. *The specified uncertainties correspond to two standard deviations. The uncertainties are calculated taking into account the various significant error sources, including the calibration probes, the equipment, the environmental conditions, the influence of the logger, repeatability, etc... • Start set up: immediate or delayed • Time stamped data Memory set up: stop at maximum capacity / loop writing • Battery level alert with Qlever software TMI-Orion CeriDry Split

autonomy The CeriDry is powered by a battery pack; its autonomy As a result of the variety of environments and operational depends on environment and operational conditions of the conditions, TMI-Orion does not guaranty the battery lifetime application (extreme temperatures, acquisition rate). and recommends that the user determine the battery lifetime according to his own process conditions and experience. CeriDry Split is used with Qlever software platform. • CeriDry Split family of products includes CeriDry Qlever software platform: data acquisition, management Split FullRadio for fu^ wireless...

The CeriDry Split system usually includes the following • Qlever software platform (To be ordered separately) items: • A transport case (optional - to be ordered separately) • The CeriDry Split logger with a battery pack • The CeriDry Split calibration certificate • The CeriDry Split configuration and calibration file • A USB wired interface to the PC (To be ordered separately) Maintenance: TMI-Orion recommends annual preventative maintenance and calibration service for the replacement of o-rings, functional checking, calibration and adjustment. Accessories: The battery packs, engineered by TMI-Orion,...