DATA SHEET Temperature, humidity and shrinkage data logger Monitor temperature, humidity and shrinkage in drying processes of bricks, tiles and ceramics with a very small data logger in two parts for a perfect flow of the hot air. The CeriDry Mini Split is an autonomous data logger equipped with one temperature sensor, one humidity sensor and one rectractometer. This data logger is made in two parts: the retractometer is separated from the temperature and humidity data logger by a high-temperature cable. Its very small size is optimized to enter in even more challenging locations where space is limited. This solution is designed for the drying of hollow bricks, but can be used in other drying processes. The CeriDry Mini Split correlates the changes in relative humidity and air temperature with the shrinkage of bricks, tiles or ceramics during the drying process. It also enables the accurate evaluation of drying of a brick or tile. Each logger can be calibrated and adjusted at the temperature points corresponding to the user’s needs. The specified uncertainties correspond to two standard deviations. The uncertainties are calculated taking into account the various significant error sources, including the calibration probes, the equipment, the environmental conditions, the influence of the logger, repeatability, etc... • Start set up: immediate or delayed • Time stamped data Memory set up: stop at maximum capacity / loop writing • Battery level alert with Qlever software TMI-Orion CeriDry Mini Split

technical specifications Material The CeriDry Mini Split is powered by a battery pack; its autonomy depends on environment and operational conditions of the application (extreme temperatures, acquisition rate). As a result of the variety of environments and operational conditions, TMI-Orion does not guaranty the battery lifetime and recommends that the user determine the battery lifetime according to his own process conditions and experience. software and related products CeriDry Mini Split is used with Qlever software platform. Qlever software platform: data acquisition, management and visualization...

deliverables The CeriDry Mini Split system usually includes the • Qlever software platform (To be ordered separately) following items: • A transport case (optional - to be ordered separately) • The CeriDry Mini Split logger with a battery pack • The CeriDry Mini Split calibration certificate • The CeriDry Mini Split configuration and calibration file • A USB wired interface to the PC (To be ordered separately) Maintenance: TMI-Orion recommends annual preventative maintenance and calibration service for the replacement of o-rings, functional checking, calibration and adjustment. Accessories: The...