ultra-high-pressure water blasting technology
1 / 25Pages

ultra-high-pressure water blasting technology

Developing new innovations with ultra-high-pressure Marking Removal / Cleaning 14 - 29 Front module accessories 30 - 31 Removal of rubber abrasion 32 - 33 We set standards worldwide with innovative ultra-high-pressure water blasting systems for cleaning surfaces, marking removal and road engineering. We are constantly breaking new ground with our passion for modern technologies and work on developing the next big idea that will inspire our customers every day. We set ourselves ambitious goals and grow with every challenge we face and master. Our claim: Deliver innovations with added value -...

In order to provide a better focus on the respective business areas, tl traffic-lines GmbH was founded as a sales company of Maschinenbau Cernota GmbH & Co. KG in 2014. CENTRAL LOCATIONS Montabaur, Germany, Europe Showroom Middle East, Dubai, United Arab Emirates INNOVATIVE TEAM With our well-trained professionals - A good partner at your side p.irir. Montabaur,' Osterrcich Moldawtcn Thanks to many years of experience, Maschinenbau Cernota GmbH & Co. KG can respond to a wide variety of needs and special equipment. SPECIAL SOLUTIONS Can be realized without any problems 2 BUSINESS AREAS...

Remove markings, clean and optimise surfaces With ultra-high-pressure water blasting systems Rubber removal • Runways • Aerodrome aprons • Race and test tracks Did you know? traffic-lines front modules are modular and can therefore be adapted to the intended use traffic-lines front modules* can be attached directly to the vehicle for transport in a parking position Marking removal • Road markings • Markings on airports, race and test tracks, industrial ports • Special markings Control from the cab saves you additional manpower The traffic-lines duo twister® removes up to 6,000 m²/h rubber...

Conventional high-pressure water blasting hood traffic-lines annular gap suction Transport air with water and material removal Thrust direction Transport air with water and material removal Thrust direction Sealing brushes lie on the surface Waste water with sludge Marking, rubber or similar 20 to 80 mm distance between surface and suction unit Water jet hits surface directly Marking, rubber or similar With conventional technology, the milling hood usually lies firmly on the surface to be cleaned with sealing brushes - a closed system is created. During the blasting process, this causes the...

Greater efficiency via touchscreen the controller system and telemetric system With our telemetric systemconnected to the future The intuitively designed traffic-lines controller system gives the driver access to all relevant functions during operation. The system has various automatic settings and can be programmed according to the customer‘s preferences. Thanks to the telemetric system, you are able to check all relevant functions of the machine remotely. Important process variables such as speed, pressure, water level and temperatur are recorded permanently and are thus also available...

Joint protection in a class of its own -with our patented joint cover To protect the expansion joints in the asphalt, we have developed a patented joint cover. This can be conveniently lowered by the machine operator from the cab. As can be seen in the video (see QR code), it rests on the joint and protects the soft bitumen filling from surface treatment. After driving over the joint, the joint cover is picked up again and moved back to its original position. Thanks to our patented technology, no to hardly any phantom marks are created when the joint cover is driven back. Surface protection...

mobile twister The mobility and its working width of up to 340 mm makes the traffic-lines mobile twister the perfect choice for marking removal in hard-to-reach places or indoors. It can be used on any surface. Are you looking for a mobile and cost-effective solution to remove markings? Then the mobile twister is the right choice. Nozzle type and quantity Up to 16 round jet nozzles

The working width of 520 mm makes the twister the perfect choice for marking removal. The traffic-lines twister is particularly effective at removing paint, thermoplastics, adhesive tape and agglomerates. Especially small areas can be cleaned well from all kinds of dirt. The precise alignment of the twister makes it exceptionally efficient when removing markings or cleaning different surfaces. Thanks to its compact design, it works quickly, saves water and is cost-effective. Working width: Up to 350 mmSpecialist for the following areas of application: • Marking removal • Cleaning of road...

twister edge From edge to edge The unique shape of the twister edge allows it to drive close (up to 5 cm) to obstacles such as kerbs or walls. The traffic-lines twister edge is equipped with a side shield which allows the canopy to be removed close to a boundary. This allows the marking removal within 5 cm to the edge. Thanks to a matching adapter, conventional bonnets can easily be replaced by the twister edge. Working width: Up to 350 mmSpecialist for the following areas of application: • Marking removal close to the edge • Cleaning of road markings close to the edge • Cleaning of porous...

dynamic twister® The traffic-lines dynamic twister® is perfectly suit- More over the removal of marking or substrate is ed for cleaning surfaces with a width of 30 - 52 cm. faster, saves water and is deployable in a cost-effective With its dynamic arm the suction hood can be moved fashion. Thanks to its compact design, the by 180° in all directions and within a working radius of traffic-lines dynamic twister® can be flexibly adapt- 4.50 m. ed to any condition and is thus versatile in its usage. Therefore it is the ideal solution for the removal of markings. The dynamic twister® is most...

With its up to 7.80 m long, 180° horizontal and 360° vertically movable arm, the traffic-lines twister telescope is the perfect choice for cleaning and demarking work in hard-to-reach places, such as sidewalks. The dynamic arm is conveniently adjusted during operation from the operator's cab via joystick. For road transport, the attachment is set to transport mode and can remain on the truck. Working width Spray bar - Revolutions per minute • Marking removal on difficult to reach surfaces • Cleaning of road markings • Cleaning of a wide variety of surfaces: porous asphalt, concrete,...