CHEERONG Tianchang Cheers Metal Limited Tianchang QIS Import&Export Co., Limited Add: NO. 922, JiaFu International Zone, GuangLing Road,Tianchang 239300, Anhui, China Email: [email protected]

Exporting 15~20 full containers per month, Tianchang Cheers Metal Limited focuses on manufacturing airport special vehicles and airport ground service equipment.Our main products include airport runway lights, airport taxiway lights, airport trolleys, airline carts, aircraft containers, aviation pallets, airport passenger stairs, airport conveyor belt loaders and other airport special vehicles. With more than 10 years' experience in the overseas market, we have strong capabilities in quality and cost control. We export goods through our affiliated sister company "Tianchang QIS Import & Export...

Design Specifications • Complies with Annex 14 of the International Civil Aviation Organization Convention (ICAO) - Airport Requirements; • Complies with the provisions of the Federal Aviation Administration (FAA) AC150/5345-44J; • Complies with the provisions of the National Standard of the People's Republic of China GB/T7256-2005 "General Requirements for Civil Airport Lighting”; Order code BP(L)- Y-SHD-n Y-yellow background with black characters R-red background with white characters B-black background with yellow characters Application Applicable to civil and military airports, installed...

Wiring method Lighting structure Single-sided sign Secondary cable Isolation transformer Double-sided sign 2. Open the package, check the appearance and confirm that there is no damage; 3. Place the sign on the cement base to be installed, and confirm that the distance from the edge of the taxiway surface to the nearest side of the sign meets the requirements of relevant standards; 4. Fix the bottom flange with M10 expansion bolts, and fix the free end of the mooring chain with a large gasket with an inner diameter of 10mm on one of the bolts; 5. Check the four bolts on the circumference of the...

Sequential flash system — Installation method: P flat type L vertical type Lighting Marking Sequential flash system • Comply with the International Organization for Standardization (ISO) standards; • Comply with the provisions of Annex 14-"Airports" • (2009.7-Fifth Edition) of the Convention on International Civil Aviation Organization (ICAO); • Comply with the provisions of the "Airport Design Manual" of the International Civil Aviation Organization; • Comply with the provisions of AC150/5345-51B of the Federal Aviation Administration (FAA); • Comply with the provisions of the Chinese national...

Installation Steps 1. Clean the site and level the ground where the flange is installed to ensure that the lamp remains level after installation. 2. When unpacking, check whether the parts are complete and handle the lamp carefully to avoid damage. 3. Connect the easily breakable parts to the lamp flange and tighten them. 4. Connect the lamp to the isolation transformer box or to the ground, pass the plug through the easily breakable parts and the flange, and connect it to the isolation transformer connector in the isolation transformer box. 5. Fix the lamp body with the lower set screws. Lamp...

Vertical approach light XL(C)-620-H Vertical approach side light • Comply with the standards of the International Organization for Standardization (ISO); • Comply with the provisions of Annex 14 of the Convention of the International Civil Aviation Organization (ICAO) - "Airports" (2009.7-Fifth Edition); • Comply with the provisions of the ICAO-''Airport Design Manual"; • Comply with the provisions of the Federal Aviation Administration (FAA)ACI 50/5345-46; • Comply with the provisions of the Chinese national standard GB7256-2005 "General Technical Requirements for Civil Airport Lighting"; •...

Installation basic diagram 1 Mast installation Installation Steps 1. Clean the site and level the ground where the flange is installed to ensure that the lamp remains level after installation. 2. When unpacking, check whether the parts are complete and handle the lamp carefully to avoid damage. 3. Connect the easily breakable parts to the lamp flange and tighten them. 4. Connect the lamp to the isolation transformer box or to the ground, pass the plug through the easily breakable parts and the flange, and connect it to the isolation transformer connector in the isolation transformer box. 5. Fix...

PAPI-640-H Precision approach path IndicatorDesign Specifications •Comply with the International Organization for Standardization (ISO) standards; •Comply with the airport requirements of Annex 14 of the ICAO Convention; •Comply with the provisions of the US Aviation Administration (FAA) AC150/5345-28G; •Comply with the provisions of the national standard GB/T 7256-2005 "General Requirements for Civil Airport Lighting"; •GB/T3977-2008 "Color Representation Method"; •GB/T7000.1-2007 "General Requirements and Tests for Lighting"; •QB/T3741-1999 "Lighting Electroplating, Chemical Covering"; •AC-137-CA-2015-07...

Lighting structure Indicator signal diagram Lighting wiring Each luminaire is powered by two 200W isolation transformers connected in series. Packing weight 1 set of PAP, unit packaging size: 840*590*300;Weight: 25kg. PAP I APAPI CHEERONG www.aircheerong.com

PML-610-H Runway End Light PRL-620-H Runway Threshold • Comply with the standards of the International Organization for Standardization (ISO); • Comply with the provisions of Annex 14 of the Convention on International Civil Aviation Organization (ICAO) - "Aerodromes" (2009.7-Fifth Edition); • Comply with the provisions of the ICAO - "Airport Design Manual"; • Comply with the provisions of the Federal Aviation Administration (FAA) AC150/5345-46 Comply with Chinese national standards; • GB7256-2005 "General Technical Requirements for Civil Airport Lighting"; • GB3977-83 "Color Representation Method";...