TestVonics Precision Air Data Calibrators ™ ADC-2555 Air Data Calibrator Perform enhanced Calibrations on a Variety of Equipment Brilliant, High Resolution LED Backlit 10.4” LCD Touchscreen Easy to use, intuitive and upgradable Graphical User Interface Part Numbers P/N: ADC-2555 NSN: 6640-01-653-2520 ADC-2555 Air Data Calibrator TestVonics ADC-2555 Air Data Calibrator is a high accuracy air data management system. The calibrator is capable of controlling and measuring Altitude and Airspeed pressures to the highest degree of accuracy. The control and measurement range of the test system meets or exceeds most requirements for commercial and military test applications. In addition, accuracy of ADC-2555 complies with requirements for RVSM. The ADC-2555 features TTU-205J ECC software. Features The ADC-2555 features a brilliant 10.4-inch LED backlit LCD display. A 5-wire resistive touchscreen allows the calibrator to be controlled directly from the front panel. An on-screen keyboard appears automatically when operator input is needed. Additionally a USB keyboard and mouse is included with the calibrator for redundant data input if desired. The calibrator uses 2 digiquartz transducers which provide unmatched performance. Corrections are done through software requiring no mechanical adjustments and are capable of holding accuracy for a period of one (1) year. Protection and Safety Features The ADC-2555 is designed with hardware and software features for maximum protection to the operator and unit under test (UUT). The calibrator features input pressure regulation, over-range, over-limit and over-pressurization protection. Micro-porous filters and screening prevent debris from contaminating the system. The calibrator is equipped with pressure relief valves to protect the pneumatic system components and the UUT from damage. In the event that the calibrator loses power, the manual vent can be used to safely vent both the test set and the UUT to ambient. The Test Program function allows the operator to create virtually unlimited test number of test routines for automated testing. These test routines save time and provide improved test consistency. Measure Mode Control Mode Leak Test Mode Test Program (Control) Mode Simple and Intuitive Interface The ADC-2555 software provides a familiar and intuitive graphical user interface. Modes of Operation are easily selected through tabs located along the top of the screen. The operator can easily switch between modes while testing without affecting operation. The calibrator measures and records readings, while displaying data as a table or graphically. All information is stored directly on the calibrator and reports can be printed. The ADC-2555 can be operated remotely using the RS-232 (serial) port on the rear panel. The operating platform allows the system to be upgraded for future test applications through software upgrades, standalone installer packages or customized software applications

Static (Ps) Altitude Control Range 1 Ps Measure Range Altitude Accuracy Altitude Rate 2 Altitude Resolution Altitude Units 3 -10,000 to 109,985 ft *Control ranges can be limited 42.4375 to 0.2046 inHg through software upon request 0.001 to 46.000 inHg ± 0.003 inHg or 0.008% FS 0 to 50,000 ft/min / 20.0 inHg/min 1 ft / 0.01 mbar / 0.0001 inHg (Ps) / 0.01 mmHg feet (ft) / meters (m) / millibar (mBar) / inches mercury (inHg) millimeters mercury (mmHg) / inches water (inH20) / PSIA Pitot (Pt) Airspeed Control Range 1 Control ranges can be limited through software upon request Rear Panel...