TE-FLSA
9Pages

HYDRAULICS, ELECTRICS/ELECTRONICS Test Equipment For Single Aisle Flow Line >tE-FLSA< >TE-FLSA1< (part of >EHPSAT6-8<) High Pressure Test, Flushing and Particle Measuring >TE-FLSA4< Rudder Deflection Test >TE-FLSA3< Bonding and Loop Resistance Test The equipment has been developed for testing diverse characteristics of the vertical tail plane of Single Aisle planes (AIRBUS A318 to A321) in the flow line at the AIRBUS factory in Stade/Germany. > Flexible application of the test equipment by mobile setup - Low and high pressure tests of tube lines - Flushing incl. particle measuring - Bonding and loop resistance test - Rudder Deflection Test (Move Rudder) - Hydraulic supply - Gap measurement of fuselage fittings - Antenna test - Continuity and insulation test of the electrical cable harnesses > Test devices of the same type can be interchanged > Central operation / remote control of the single modules via WLAN or VNC > Automatic test programs > Use of approved functions and test equipment The test equipment can be adapted for other components as well. TEST-FUCHS GmbH / Test-Fuchs Strasse 1-5 / A-3812 Gross-Siegharts T +43(0)2847 9001-0 / F +43(0)2847 9001-299 / office@test-fuchs.com

GENERAL INFORMATION > Test equipment is of an ergonomic design > By the paint and the anodized aluminium front panels, the test devices are resistant against the test medium (skydrol) and cleaning detergents > The LAN- and WLAN connection enables maintenance of the TEST-FUCHS test stand software, test procedures, network printer as well as trouble shooting on the device > Easy and quick calibration is provided via the TEST-FUCHS standard software TECHNICAL DATA > Application area: Single Aisle planes: > Operating conditions: Airbus A318 Operating temp.: Storage temperature: Airbus A319...

Test Equipment For Single Aisle Flow Line >TE-FLSA1< HIGH PRESSURE TEST, FLUSHING, PARTICLE MEASURING > Developed for different hydraulic tests on the vertical tail: preliminary test for tightness with compressed air, flushing and particle measuring for each system, leakproof test with low and high pressure, filling, draining and depressurization of the hydraulic lines > Test station specific hydraulic valve groups for pressure test performance only on the respective part and not on the whole system > The same test equipment is used for TWIN AISLE Hydraulic test TECHNICAL DATA > Electrical...

Test Equipment For Single Aisle Flow Line HYDRAULIC SUPPLY >TE-FL5A2< > Developed for hydraulic supply of more test stands with two independent power units; redundant design > Tank compensating line to connect the tanks, full volume of both tanks can be used > Optic and electrical fill level monitoring, filter in the supply and return lines as well as integrated cooling units Hydraulic power unit (>TE-FLSA2< consists of two power units) Width: Depth: Height: Weight: TECHNICAL DATA > Electrical supply (requirements): Mains connection: 3/N/PE AC 50Hz 400V Performance: 38kVA Nominal current:...

Test Equipment For Single Aisle Flow Line BONDING AND LOOP RESISTANCE TEST >TE-FL5A3< > Developed for bonding and loop resistance tests > “Bonding Tester >MVP10S-24FS<“ to test electrical equipment with long connecting lines with an output performance of up to 240W > Loop resistance measurement by means of “Loop Resistance Tester >IM2-FS<“ and “Impedance Measurment Clamp >IMZ7< with automatic compensation and range switchover, search-mode for quick localization of defect connections Nominal current: 13A Prefuse: 13A GL (mains line) Width: Depth: Height: Weight: > Measurements: Bonding...

Test Equipment For Single Aisle Flow Line > Developed to test the rudder mechanics of the vertical tail > The “rocker“ mounted on the carrier of the vertical tail simulates rope hoist for rudder operation > Rocker with integrated angle and force measurement > Mobile hydraulic distributor for flexible connection to the hydraulic power unit > External rudder angle sensor Network cabinet Hydraulic distributor TECHNICAL DATA > Electrical supply (requirements): Mains connection:1/N/PE AC 50Hz 230V Performance: 2.9kVA Nominal current: 13A Prefuse: 13A GL (mains line) > Hydraulic supply...

Test Equipment For Single Aisle Flow Line >TE-FLSA5< > Developed for gap measurement of the fuselage intake from the vertical tail. The vertical tail can be mounted exactly afterwards and the exact placing on the carrier is already ensured during manufacture > Gap measurement with 12 LVDT- stroke measurements > Accessory drawer for storing the test cable and sensors TECHNICAL DATA > Electrical supply (requirements): Mains connection:1/N/PE AC 50Hz 230V Performance: 2.9kVA Nominal current: 13A Prefuse: 13A GL (mains line) > Dimensions and weight: Width: Depth: Height: Weight: TEST-FUCHS GmbH...

Test Equipment For Single Aisle Flow Line ANTENNA TEST >TE-FL5A6< > Developed for testing the VOR antenna and antenna cabeling > Evaluation of continuity and reflexion value of the antenna > Automatic changeovers > Redundant antenna line > Automatic test program TECHNICAL DATA > Electrical supply (requirements): Mains connection:1/N/PE AC 50Hz 230V Performance: 2.3kVA Nominal current: 10A Prefuse: 13A GL (mains line) > Dimensions and weight: Width: Depth: Height: Weight: > Measurements: Antenna measurement TEST-FUCHS GmbH / Test-Fuchs Strasse 1-5 / A-3812 Gross-Siegharts T +43(0)2847 9001-0...

Test Equipment For Single Aisle Flow Line >TE-FLSA7< CABLE TEST > Developed for cable tests of cable harness in the vertical tails > Designed for more application areas with central control including more complete cable sets and two independant switching boxes > Additional reserve cable packages for test continuation in case of failure > Cable storage in the switch cabinet or in the cable drums with a rope hoist hanging from the wall TECHNICAL DATA > Electrical supply (requirements): > Dimensions and weight: Mains connection:1/N/PE AC 50Hz 230V Performance: 1.4kVA Nominal current: 6A...