1. Catalogs
  2. TELERAD
  3. Serie 9010-2G

Serie 9010-2G

Serie 9010-2G

Serie 9010-2G

Product catalog summary
Overview
The TELERAD Series 9010-2G radio systems are designed for military air traffic control centers, offering scalability, high reliability, and remote control capabilities.

Main Features
  • Multimode functionality in a single Software Defined Radio
  • Supports A3E, F3E, and upgradable UDL (D8PSK, 31500 bits/s)
  • Operates in a wide band of 225-400 MHz
  • RF Output Power ranges from 5 to 50 W
  • Remote control and maintenance with built-in test capabilities
  • Conforms to VoIP standards (EUROCAE ED-137)
  • Includes SNMP and JBUS protocols
  • Features two Ethernet ports for redundancy

EM9010-2G Transmitter
  • Mechanical: 483 mm width, 430 mm depth, 132 mm height, weight < 14 kg
  • Power consumption varies with voltage: 28VDC, 230VAC, 115VAC
  • RF output power adjustable in 0.5 dB steps
  • Includes protections against overheating, low voltage, and high VSWR
  • 100% duty cycle with external fan
  • Audio input adjustable, with specific bandwidths for different channel spacings
  • High spectral purity and low adjacent channel power

RE9010-2G Receiver
  • Mechanical: 483 mm width, 430 mm depth, 44.5 mm height, weight < 4 kg
  • Power consumption varies with voltage: 28VDC, 230VAC, 115VAC
  • High sensitivity and low distortion
  • Effective bandwidth and high adjacent channel rejection
  • Strong spurious rejection and intermodulation performance
  • Adjustable audio line output with squelch capabilities

General Data
  • Frequency range: 225-400 MHz with stability ≤ 0.3 ppm
  • Channel spacing options: 25 kHz, 12.5 kHz, 8.33 kHz
  • Supports A3E/F3E modulation and D8PSK for UDL
  • Data interface via RS485 up to 115.2 Kbps
  • Maintenance options include local and remote capabilities with built-in tests

Environmental and Power Specifications
  • Operating temperature: -20 °C to +55 °C
  • Storage temperature: -40 °C to +80 °C
  • Power supply options include AC and DC with automatic switching
  • IP technology supports VoIP and SNMP with dual Ethernet ports

Standards Compliance
  • ICAO SARPS
  • ETSI EN 302 617: AM
  • ETSI EN 301 489 (-1/-22)
  • EUROCAE ED-137: VoIP
See more

Catalog excerpts

Serie 9010-2G-1

Aeronautical and Maritime Radio-communication Systems DEFINED RADIOS ■ Outstanding sensitivity and cositing, The TELERAD Series 9010-2G radio systems are specifically designed to meet the operational requirements of military air traffic control centers. Fully scalable and with growth capacity they feature high reliability and remote control and maintenance capability. MAIN FEATURES ■ Multimode functionality in one Software Defined Radio ■ Remote control and maintenance capability Built-in test ■ 2 Ethernet ports for redundancy This sheet is available on the site

 Open the catalog to page 1
Serie 9010-2G-2

Frequency range: Frequency stability Channel spacing: Data interface: ■ Maintenance: Built-in test, software loading ■ Setup functions: frequency, operation, parameters ■ Measurements: Tx output power, VSWR, DC voltage, Rx ■ Relative humidity: 95 % at +40 °C (non-condensing) Power supply 0 Automatic switching from AC to DC input Mechanical characteristics: Carrier Offset (ICAO Annex 10): Up to a VSWR of 2:1 without power reduction Power reduction on overheating, low voltage and high VSWR Duty cycle: ■ Audio input adjustable from -30 to 0 dBm (max. +10 dBm) ■ Audio input impedance: 600 Q ■ Audio...

 Open the catalog to page 2

All TELERAD catalogs and technical brochures

  1. RBT9300MS

    4  Pages

  2. TRX UHF

    2  Pages

  3. TRX VHF

    2  Pages

  4. Serie 9000-2G

    2  Pages

  5. RBT9300MS-EN

    4  Pages

  6. RBT9300-EN

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.