Datasheet Description The TR-100AF TACAN Test Set provides the operator with an easy to use, ruggedly designed ramp test set used for verification of airborne TACAN Transmitter Receivers. Highlights: Ground to Air (G/A), Air to Air (A/A), and Air to Air Beacon (A/A BCN) Modes Inverse Mode, North Reference Trigger (NRT) (A/A, G/A) T/R(X,Y) Inverse pulses, 15Hz AM mod,2700Hz squitter, 1350Hz Ident+equalizer pulses, (NRT) Covers entire frequency range from Channels 1 thru 126 X and Y Accurate Power and Frequency measuring capability** Numerous Heading and Range Selections available Tel-Instrument Standard 2 year warranty included The TR-100AF features a large backlit LCD display, combined with easy setup menus and user-friendly controls, make the TR-100AF effortless when conducting quick and accurate tests of airborne TACAN equipment. The Direct Connect feature provides precise measurements of power, frequency, and sensitivity**, no external attenuator is required. ** Denotes A/A Mode Only Modes: Ground to Air (G/A), Air to Air (A/A), Air to Air Beacon (A/A BCN), Inverse Mode (A/A, G/A) North Reference Trigger at BNC connector on the front (NRT) Selectable Bearings from 0 to 359° in 1° increments in Air to Air Beacon (A/A BCN) and Ground to Air (G/A) modes Selectable ranges of 0 to 350 nmi. in 1 nmi. increments Selectable velocity adjustments of 120 to 1200 knots in 10 knot increments Built in diagnostic Self Test Battery allows 8 hours of operation before recharge (25% Duty Cycle) Built in Battery Charger, 100 to 240 VAC, 50 to 400 Hz Rugged and weather resistant case Direct Connect Mode and Omni-Antenna interconnects Pass/Fail criteria based on stored parameters IDENT – Morse Code audio transmitted Standard 2 year limited warranty Specifications Subject to Change Copyright © 2010 Tel-Instrument Electronic

Test Set Transmitter* Frequency Range Frequency Accuracy Power Out Bearing Accuracy Range Accuracy Velocity Accuracy Antenna Test Set Receiver* Freq Measurement Range Freq Measurement Accuracy Power Freq Measurement Range Power Measurement Accuracy Sensitivity Reply Efficiency Settings Efficiency Accuracy 962 to 1213 MHz ± 10 kHz 2 dBm ±3 dBm (@ Ant Port) ± 1° typical, ± 2° max. ± 0.5 nmi. Typical, ± 1.0 nmi. max. ± 3% Omni-Directional Selected Frequency ± 3.5 MHz ± 200 kHz 47...64dbm ± 2 db (direct connect) 47...64dbm ± 3 db (antenna to antenna) < -35 dBm (Ant port) Selectable 25%, 50%, 75%...