1. Catalogs
  2. Tel-Instruments (TIC)
  3. CAT III NAV Ramp Test Set

CAT III NAV Ramp Test Set

CAT III NAV Ramp Test Set

CAT III NAV Ramp Test Set

Product catalog summary
Overview: The T-30D CAT III NAV Ramp Test Set is a portable and lightweight device designed for one-man operation to perform ICAO Annex 10 CAT III ILS ramp check certification. It is capable of checking VOR, GS, LOC, MB, Flight Director, and Autopilot systems.
Key Features:
  • Dual VOR/LOC/GS frequencies and simultaneous MB/ILS operation.
  • Extended-range variable ILS and quick operation from the cockpit.
  • Built-in NICAD battery and charger, with a rugged Mil-Spec case.
  • CE Compliant and backed by 40 years of manufacturing experience.
Specifications:
  • VOR: Allows selection of VOR bearing in 45º steps, manual slewing for full-scale deflection, and modulation checks.
  • LOC and G/S: Preset DDM deflections, manual slewing for full-scale deflection, and simultaneous LOC/GS/MB mode.
  • Marker Beacon and ILS: User selection of marker types, simultaneous MB and ILS output, and variable DDM settings.
  • Physical Characteristics: Size: 14.5 x 9.4 x 6.5 inches, Weight: 18 lbs, Power: Internal battery or external 120/220 VAC 50-400 Hz.
  • Environmental: Storage temperature: -51° to +71°C, Operating temperature: -30° to +55°C.
Additional Information: The device includes a built-in diagnostic self-test and requires minimal training due to its simple front panel and controls. It is available with non-standard VOR/ILS frequencies upon local agency approval.
See more

Catalog excerpts

CAT III NAV Ramp Test Set-1

Description • Permits ICAO Annex 10 CAT III ILS ramp check certification • Checks VOR, GS, LOC, MB, Flight Director, and Autopilot • Dual VOR/LOC/GS frequencies • Separate and simultaneous MB/ILS • Dual extended-range variable ILS • Quick, easy one-man operation from the cockpit • Lightweight and portable - weighs only 18 lbs. • Built-in NICAD battery and charger • Two year limited warranty; five & ten year available • Rugged, reliable, affordable • Backed by 40 years manufacturing experience • CE Compliant • Available non standard VOR/ILS frequencies with local agency approval The T-30D Ramp Test Set is designed for one-man operation of the VOR, MB, GS, LOC, flight director, and autopilot from the cockpit or flight deck. Built into a rugged and durable case, the T-30D will permit compliance with CAT III periodic ramp check certification in all weather conditions. VOR • Allows selection of VOR bearing in 45° steps from 0 -315° • Manual slewing provides capability for checking full-scale deflection for “sticky” analog meter movement (+10°) • Permits deletion of the REF 0, VAR 0, 30 and 9960 Hz modulation to check flag operation • 1020 Hz tone enable switch • Manual slewing of VOR bearing ± 10° left and right of course Marker Beacon and ILS • User selection of inner, middle, and outer marker • Simultaneous MB and ILS output signals • Variable and Preset DDM settings • Variable attenuator to control output LOC and G/S • Allows selection of preset DDM deflections of: On Course, one and 2 dots off center • Full-scale deflection can be tested using manual slewing • Allows 90 and 150 Hz tones to be deleted • Simultaneous LOC/GS/MB Mode • 1020 Hz tone enable switch • Variable attenuator calibrated in 1 dB steps • Two preset paired frequencies available Additional Features • Rugged Mil-Spec case • Built in battery and charger • 100/220 volt operation 40 - 400 Hz • Simple to understand front panel and controls that requires minimal training • Built-In diagnostic Self Test Specifications Subject to Change

 Open the catalog to page 1
CAT III NAV Ramp Test Set-2

VOR Operation LOC Operation Physical Characteristics Internal Battery or external 120/220 VAC 50-400 Hz Tel-Instrument Electronics Corp. Leading the Avionics Test Industry into the 21st Century! 728 Garden Street Specifications Subject to Change Copyright © Tel-Instruments Electronics Corp.

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.