TB-CN3R1 FEATURES To control up to 255 cameras from one key board. PELCO-D protocol supported Preset position control Various manual speed control (1 ~ 64 steps) Maximum speed is changed according to zoom ratio User password and system hold function To support DVR protocol (Need to be modified) To support web communication for TX/RX (3 AXIS WEB only) Slave communication by RS232 and 485 BUILT IN LCD DISPLAY WITH BLUE SCREEN PROGRAMMABLE USER PREFERENCE | TB-CN3R1 DESCRIPTIONS| TB-CN3R1 DIMENSION GENERAL DESCRIPTIONS 3 AXIS STANDARD are Pan/Tilt Controller and it Allows Operator to use the Functions Easily. This Controls Camera Functions such as Pan, Tilt, Zoom, Focus and DVR Control. This Saves and Calls Camera Preset Positions. Activates Pre-Programmed Pattern, Auto-Scan and Group Tour Function Keys. The LCD Shows Display Current Status as well as Provides a Menu to set Operational Parameters. This Controller is Designed for Desktop Operation and Interface Connectors are Located in the Junction Box. Programmable User Preference. (Tour, Preset, Pattern, Auto-Scan, ETC.) To Recall Programmed Guard Tours from each Dome Camera To Recall Programmed Auto-Scan from Selected Dome Camera