Type - J suspension model
1Pages

Innovative helmet harness system As a result of our original test, the Type J suspension model has shock absorption performance equal to or higher than ■ i ii iuvuli vu iivimui i iui i ivww y iv/i i i QjType ■ J suspension model —^ Japanese PAT.No 5591984 PAT-P : Thailand, Malaysia, Indonesia, Vietnam, China, Korea The harness system that keep you cool, safe and comfortable. 1.Coolness There are two Japanese safety standards for industrial safety helmets. 1)For protection against flying or dropping objects (Test impact point: only parietal area) 2)For protection in the events of tumbling and falling down (Test impact point: For against flying or dropping objects + previous head, back of the head) Helmets that are designed to protect the user from impact of falls are usually equipped with impact absorption liners to ensure better safety. However, some customers dislike it as it traps heat. The impact absorption liner disturbs the flow of internal air, trapping hot air in the helmet. Type J suspension solved this problem. As the Type J suspension passes the "protection in the events of tumbling and falling down" standard without the impact absorption liner, it enables helmets to have improved ventilation compared to conventional models. SAFETY PRODUCTS 2.Safety Conventional models without the impact absorption liner was only for helmets designed to protect the user from flying or falling objects. The Type J suspension passes the "protection in the events of tumbling and falling down" standard without the impact absorption liner by using a new impact absorption system. that of conventional models (with impact absorption liner models). ■ Japanese standard / Impact absorption test (For protection in the events of tumbling and falling down) impact area TANIZAWA original impact absorption test impact area 3.Easy to disassemble The new disassembly system allows How to disassemble the suspension. the suspension to be changed easily. The impact absorption liner disturbs the flow of internal air, trapping hot air in the helmet. As there are no impact absorption liners, internal air is allowed to flow and expel hot air. Comparison of head temperature and the humidity. 1 .Grasp the hammock 2.Pull upward, along the grip point. Helmets with internal thermometry were placed on thermal mannequin heads set to 37°C . Mannequins are placed in still air for the first 5 minutes to compare temperature rise. Mannequins are then exposed to wind with a velocity of 1 m/s (equivalent to walking speed) for the next 5 minutes to compare ventilation performance. 4.Washable Because there is no styrofoam liner, it can be washed easily. Use neutral detergent for cleaning. Warning : Organic solvents, parts cleaners, etc. are prohibited. The shell will be damaged.