ACCESS 2 BUMP
38Pages

User’s manual PARC ALTAÏS 34 RUE ADRASTÉE 74650 ANNECY CHAVANOD FRANCE RCS 387956790 Revision index : 02/04/202

Harness User’s manual | ACCESS 2 BUMP hank you for choosing the ACCESS2 BUMP. We are glad to be able to share our common paragliding passion with you. SUPAIR has been designing, producing and selling free flying equipment since 1984. By choosing a SUPAIR product you benefit from almost thirty years of expertise, innovation and listening. This is also our philosophy : working endlessly to develop better products and to maintain a high quality production. We hope you will find this user’s manual comprehensive, explicit and hopefully enjoyable as well. We advise you to read it carefully. You...

Harness User’s manual | ACCESS 2 BUMP Introduction 4 Technical specifications 5 Size choice 6 Nomenclature 7 Harness Overview 8 Accessories assembly 9 Seat plate 9 Carabiners9 Mini Bump 10 Bump 11 Speed-bar 12 Installing the reserve parachute 13 Reserve parachute characteristics 13 POD reserve parachute handle connection 13 Parachute risers – harness connection 14 Place the risers inside the sleeve 16 Riser connection – reserve parachute 17 Installing the reserve parachute in the container 18 Locking the reserve parachute handle 23 Gear packing and tips 24 Adjustments 25 The various...

Harness User’s manual | ACCESS 2 BUMP Welcome to the world of paragliding according to SUPAIR, a world of shared passion. The ACCESS 2 BUMP harness is designed for all for all flying enthusiasts no matter their level. The well though-out design and choice of materials were guided by the same quality and durability objectives. The ACCESS2 BUMP harness was certified EN 1651 : 2018 and LTF Nfl II 91/09. Indicating that it meets European and German safety requirements. After reading this manual, we suggest you to check your harness in static hang-posts to adjust it before your first flight. N.B...

Harness User’s manual | ACCESS 2 BUMP TECHNICAL SPECIFICATIONS Harness size Pilot size (cm) Pilot weight (mini - maxi) (kg) Harness weight (+ carabiners+speedbar)(kg) Designed for Back lenght (cm) Backrest tilt adjustment (cm) Seat length (cm) Seat width (cm) Carabiners height (cm) Carabiners distance (cm) Impact damping system Certification Tandem (Pilot or Passenger) Towing Quick-out carabiners compatibility Reserve parachute pocket volume (litre) Back lenght Backrest tilt adjustment Seat width Carabiners height Seat length Carabiners distance ACCESS 2 BUMP | page 5

Harness User’s manual | ACCESS 2 BUMP SIZE CHOICE Choosing your harness size is important. You will find here below a height/weight table that will help you in your size choice. With its hammock architecture and its “lying flat” flying position, we advise you to try out the harness under a hanging device at one of our retailers in order to choose the correct size. For a complete list of our retailers, please click here : www.supair.com Preliminary test under hanging device

Harness User’s manual | ACCESS 2 BUMP COMPONENTS LIST 2x 45 mm Zicral self-locking carabiners « AC2 » reserve parachute handle Polypropylene seat plate Bump AB2 Options Adjustable accelerator FREESPEE (ref: ACCELFREESPEE) Solo DYNEEMA risers (réf. : ELESOLODYNEEMA) Carbon seat plate (réf. :seat plate S 33*34cm: MPPL005) (réf. :seat plate M 35*37cm: MPPL006) (réf. :seat plate L: 37*37cm: MPPL007)

Harness User’s manual | ACCESS 2 BUMP HARNESS OVERVIEW Chest strap adjustment Backrest angle adjustment Shoulder strap adjustment Reserve parachute pocket Reserve parachute handle Chest strap with automatic buckles Paragliding main hooking points 10 Reserve parachute hooking points 3 11 Pulleys For speedsystem 12 Bump 13 Small storage pocket 8 14 Back storage pocket 15 Radio pocket ACCESS 2 BUMP | page 8

Harness User’s manual | ACCESS 2 BUMP ACCESSORIES ASSEMBLY Carabiners Compatible carabiners : 45 mm Self-locking zicral carabiners Réf. : MAILCOMOUS45 Insert the carabiner through the main harness riser connection. Seat plate Polypropylene seat plate : Size S Réf. : MPPL030 Size M Réf. : MPPL031 Size L Réf. : MPPL032 Size XL Réf. : MPPL033 1. Open the velcro located under the rear side of the seat. 2. Slide the seat plate inside its housing and fasten the velcro. Front Flight direction

Harness User’s manual | ACCESS 2 BUMP ACCESSORIES ASSEMBLY MINI BUMP 2 Compatible Mini Bump : Mini bump assembly : 1. Open the back storage pocket. 2. Open the zip located at the bottom of the back storage pocket, then you’ll access to the mini bump’s space 3. Slide the minibump in 4. Fasten the zip 5. Fasten the storage pocket ACCESS 2 BUMP | page

Harness User’s manual | ACCESS 2 BUMP ACCESSORIES ASSEMBLY BUMPER AB2 Compatible Bumper : Bumpair assembly : 1. Open the zip of the storage situated under the seat, then you’ll access to the bumpair space 2. Slide the bumpair in 3. Fasten the zip. ACCESS 2 BUMP | page

Harness User’s manual | ACCESS 2 BUMP ACCESSORIES ASSEMBLY Speed-bar system (option) Compatible speed-bar : STANDARD double stage speed-bar (Réf. : ACCELSOUPLE) Speed-bar 2B light ( ref: ACCELSOUPLELIGHT) Adjustable speed-bar FREESPEE ( ref: ACCELFREESPEE) Speedbar assembly : Regarding either side of the harness: : Pull the line through the speed-bar line guide located at the front corner of the seat plate. Pull the line up and through the speed-bar pulley. Push the speed-bar line in the Speed-bar opening. Finally, attach a hook to the cord before connecting it to the glider’s speed-bar. 2...

Harness User’s manual | ACCESS 2 BUMP INSTALLING THE RESERVE PARACHUTE Thank you for reading the following carefully ! We recommend for the initial rescue parachute assembly and installation to be made by a qualified professional. Reserve parachute folding and installation inside the harness must conform to the specific guidelines found in this manual. We are not responsible for any other use. The volume of reserve parachutes may vary depending on the folding Rescue parachute pocket characteristics • Flaps fastened with a cable • Volume 3 to 8 liters • Adapted to the reserve parachutes...