uPrint® SE/uPrint® SE Plus
12Pages

uPrint® SE stratasys uPrint® SE Plus SITE PREPARATION GUIDE

LIABILITY STATEMENT The information in this document is subject to change without notice. Stratasys, Inc. makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Stratasys, Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document is protected by copyright. All rights reserved. Its use, disclosure, and possession are restricted by an agreement with...

REVISION LOG Revision Date Description of Changes SAFETY The following basic safety tips are given to ensure safe installation, operation, and maintenance of Stratasys equipment and are not to be considered as comprehensive on matters of safety. Although the uPrint SE/ uPrint SE Plus printers are designed to be a safe and reliable, access to areas of the printer are potentially dangerous. SAFE ENVIRONMENT • Connect equipment to a grounded facility power source. Do not defeat or bypass the ground lead. • Know the location of equipment branch circuit interrupters or circuit breakers and...

ABOUT THE UPRINT SE/UPRINT SE PLUS The uPrint SE/uPrint SE Plus printers incorporate the latest in innovative technologies to provide you with precise prototypes from a CAD design. The uPrint SE/uPrint SE Plus printers build models from CAD STL files that are sent to the system using a USB cable from a dedicated host computer. The printers build threedimensional parts by extruding a bead of ABS material through a computer-controlled extrusion head, producing high quality parts that are ready to use immediately after completion. The uPrint SE printer or uPrint SE Plus printer (depending on...

Decide where to install the printer based on the following: 5. LAN Requirements SPACE REQUIREMENTS UNCRATED DIMENSIONS AND WEIGHTS Make sure that the installation location can accommodate the printer’s weight and dimensions, plus required clearances. The installation location must be a stable flat surface capable of holding 220 pounds (100 kg) for single material bay option, and 260 pounds (120 kg) for additional material bay option. Material Bay Height 6 inches (15.2 cm) Material Bay Width 26 inches (66 cm) Material Bay Depth 26 inches (66 cm) Material Bay Weight 17 pounds (7.7...

• Operating temperature shall be in the range of 59°F to 86°F (15°C to 30°C), with relative humidity range of 30% to 70% non-condensing. • Storage temperature shall be in the range of -40°F to 129.2°F (-40°C to 54°C), with relative humidity range of 10% to 85% non-condensing. • Altitude shall not exceed 6561.68 feet (2000 m). • Typical heat emission shall be 2250 BTU/hour. • Idle sound pressure at bystander <55 dBA (idle), operating sound pressure at bystander <62 dBA (printing). POWER CONSUMPTION (while building) For details, see the CatalystEX Workstation Requirements document available...

UNINTERRUPTIBLE POWER SUPPLY (UPS) USE AND INSTALLATION The intent of the Uninterruptible Power Supply (UPS) shutdown feature on uPrint SE and uPrint SE Plus 3D printers is to prevent required maintenance and/or system damage by safely shutting the system down in the event of an uncontrolled loss of power. Whether an in-process build of a part will complete successfully is dependent on the battery life of the selected UPS and the duration of the power outage. The user should select a UPS with the following specifications: • Runtime minimum of 15 minutes at 1000W output (run times >15...

PARTS LIST - CABLE, UPS TO 3D PRINTERItem Qty Nomenclature / Description Material Specification 1 1 Conn, Hsg, Plug, 9Pos AMP - 205204-9 5 XX.x Cable, 2 Conductor, 22 AWG ALPHA - 1172C or Equivalent Note: * May need additional pins depending on the UPS configuration. 5

Figure 2: UPS Cable Diagram

RECEIVING THE PRINTER INSPECT CRATE FOR DAMAGE Before opening the shipping crate, inspect the crate for signs of exterior damage. Report evidence of excessive damage to Stratasys and the shipping company. PREPARING FOR INSTALLATION UNPACKING THE PRINTER The work area for unpacking the system should be 36-40 inches (90-100 cm) high for the single material bay option, and 46-50 inches (117-127 cm) high for additional material bay option. For detailed unpacking and setup instructions, refer to the uPrint SE and uPrint SE Plus User Guide. SITE PREPARATION CHECKLIST ELECTRICAL INSTALLATION...

info@stratasys.com STRATASYS.COM HEADQUARTERS 7665 Commerce Way, Eden Prairie, MN 55344 + 1 888 480 3548 (US Toll Free) + 1 952 937 3000 (Intl) +1 952 937 0070 (Fax) 2 Holtzman St., Science Park, PO Box 2496 Rehovot 76124, Israel +972 74 745-4000 +972 74 745 5000 (Fax) ISO 9001:2008 Certified © Copyright 2015 Stratasys Inc. All rights reserved. For more information about Stratasys systems, materials, and applications call 888.480.3548 or visit www.stratasys.com. DOCUMENTATION FEEDBACK Customers, resellers, and Stratasys employees are encouraged to send comments about our documentation and...