ULTEM 9085 PRODUCTION-GRADE THERMOPLASTIC FOR FORTUS 3D PRODUCTION SYSTEMS ULTEM™ 9085 resin is a flame-retardant high-performance thermoplastic for digital manufacturing and rapid prototyping. It is ideal for the transportation industry due to its high strength-to-weight ratio and its FST (flame, smoke and toxicity) rating. Combined with a Fortus® 3D Production System, ULTEM 9085 resin allows design and manufacturing engineers to produce fully functional parts that are ideal for advanced functional prototypes or end use without the cost or lead time of traditional tooling. Certified ULTEM 9085 meets more stringent test criteria and retains material traceability required by the aerospace industry. Certificates of Analysis for both raw material and filament are supplied, documenting test results and identification to match filament manufacturing lot number to raw material lot number. This allows traceability from printed part back to raw material. A Certificate of Conformance certifies that the material is manufactured per specification. TEST METHOD Tensile Strength, Yield (Type 1, 0.125”, 0.2”/min) Tensile Strength, Ultimate (Type 1, 0.125”, 0.2”/min) Tensile Modulus (Type 1, 0.125”, 0.2”/min) Tensile Elongation at Break (Type 1, 0.125”, 0.2”/min) Tensile Elongation at Yield (Type 1, 0.125”, 0.2”/min) Flexural Strength (Method 1, 0.05”/min) Flexural Modulus (Method 1, 0.05”/min) Flexural Strain at Break (Method 1, 0.05”/min) IZOD Impact, notched (Method A, 23°C) IZOD Impact, un-notched (Method A, 23°C) Compressive Strength, Yield (Method 1, 0.05”/min) Compressive Strength, Ultimate (Method 1, 0.05”/min) Compressive Modulus (Method 1, 0.05”/min) TEST METHOD Heat Deflection (HDT) @ 264 psi, 0.125” unannealed Glass Transition Temperature (Tg) Coefficient of Thermal Expansion Melting Point

ULTEM 9085 PRODUCTION-GRADE THERMOPLASTIC FOR FORTUS 3D PRODUCTION SYSTEMS At the core: Advanced FDM Technology Fortus systems are based on FDM® (fused deposition modeling) technology. FDM is the industry’s leading additive manufacturing technology, and the only one that uses production-grade thermoplastics, enabling the most durable parts. ELECTRICAL PROPERTIES TEST METHOD VALUE RANGE Volume Resistivity Dielectric Constant Dissipation Factor Dielectric Strength No special facilities needed You can install a Fortus 3D Production System just about anywhere. No special venting is required because...

ULTEM 9085 PRODUCTION-GRADE THERMOPLASTIC FOR FORTUS 3D PRODUCTION SYSTEMS SYSTEM AVAILABILITY LAYER THICKNESS CAPABILITY SUPPORT STRUCTURE AVAILABLE COLORS Tan (Natural) Black Certified ULTEM 9085 is available only in Tan (Natural). The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the Stratasys material is safe, lawful, and technically suitable for the intended application, as well as for identifying the proper disposal (or recycling) method consistent with applicable environmental...

ULTEM 9085 PRODUCTION-GRADE THERMOPLASTIC FOR FORTUS 3D PRODUCTION SYSTEMS HEADQUARTERS 7665 Commerce Way, Eden Prairie, MN 55344 +1 888 480-3548 (US Toll Free) +1 952 937-3000 (Intl) +1 952 937-0070 (Fax) 2 Holtzman St., Science Park, PO Box 2496 Rehovot 76124, Israel +972 74 745-4000 +972 74 745-5000 (Fax) E [email protected] / STRATASYS.COM ISO 9001:2008 Certified © 2017 Stratasys. All rights reserved. Stratasys, FDM and Fortus are registered trademarks of Stratasys Inc. Fortus 400 mc, Fortus 450 mc and Fortus 900mc are trademarks of Stratasys, Inc. ULTEM is a registered trademark of SABIC...