Nightsun® XP IFCO
1Pages

SX-16 Nightsun® IFCO (In-Flight Change Over) Illumination Characteristics: Lamp Type: Peak Beam Intensity: 1600 Watt Short Arc Xenon 30-40 Million candlepower (white light mode) Application Information: Typical Range: 3280 ft (1 km) Useful Range For Target ID: 1 Mile (white light) (Other filters are waveband dependent) Peak Illuminance: 32 Lux (2.9 ft-cd) @ 1 km Distance Diameter at 10% of Peak Illuminance: 230 ft (70 m) wide @ 3280 ft (1 km) Adaptable to helicopters, fixed wing aircraft, maritime, and ground based applications. The In Flight Change Over (IFCO) Searchlight can be used in a variety of multiple spectral wavebands that best meet operational requirements. Electrical System: Mechanical Configuration: Searchlight Dimensions: 20.6” (523 mm) - closed position 19.5” (495 mm) - open/up position 38 lbs (17.3 kg) Internal cooling fan with filtered air intake Input Voltage: 28 Volts DC Nominal Input Current: 55-67 Amperes Start Time: 3-5 Seconds Recycle Time: None Required Searchlight power requirements are compatible with standard aircraft type DC generators. Control box has additional switch to activate IFCO function, which provides a status display when hood is fully engaged. Weight: Cooling Provisions: Mechanical Configuration: Gimbal Mechanical Configuration: Control Box Type: Weight: Slew Rate: Max. Airspeed: Two-Axis Remote Control 9 lbs. (4.1 kg) Aluminum 15 lbs (6.8 kg) Steel Standard=9° per second High Speed=18° per second 162 kts (Aluminum); 259 kts (Steel) Mechanical Configuration: Junction Box Dimensions: Weight Dimensions: Weight: Total System Weight: Typical with installation, hardware, cable assemblies: 58-78 lbs (26-36 kg)