1. Catalogs
  2. Southbourne Rubber
  3. Material properties chart

Material properties chart

Material properties chart

Product catalog summary
Material Properties Overview:
This document provides a comprehensive chart detailing the properties of various elastomeric sealing materials. The materials covered include Natural Rubber (NR), Styrene Butadiene Rubber (SBR), Butyl (IIR), Nitrile (NBR), Neoprene (CR), EPDM, Silicone (Q), Viton (FPM), Polyurethane (AU), Hypalon (CSPE), Epichlorohydrin (ECH), Hydrogenated Nitrile (HNBR), and Fluorosilicone (FVMQ).
Key Physical Properties:
  • Tensile Strength: Ranges from 1500 PSI (10k kPa) for Silicone and Fluorosilicone to 4000 PSI (27k kPa) for Polyurethane.
  • Hardness (IRHD): Varies widely, with most materials ranging between 30-95 IRHD.
  • Specific Gravity: Values range from 0.86 for EPDM to 1.85 for Hypalon.
Performance Characteristics:
  • Tear Resistance: Polyurethane and Hypalon exhibit excellent tear resistance, while Silicone is rated poor.
  • Abrasion Resistance: Polyurethane and Hypalon are outstanding, while Silicone is poor.
  • Compression Set: Most materials are rated fair to good, with some exceptions.
  • Rebound (Cold/Hot): Silicone and EPDM perform excellently in cold conditions, while Viton excels in hot conditions.
  • Dielectric Strength: Most materials have excellent dielectric strength, except Nitrile, which is poor.
  • Gas Permeability: Butyl has very low permeability, while others are fairly low.
  • Water Absorption: Silicone and EPDM are rated very good to excellent.
  • Oxidation and Ozone Resistance: EPDM and Viton show outstanding resistance.
  • Sunlight Ageing: EPDM and Viton are outstanding, while Natural Rubber and SBR are poor.
  • Heat Ageing: Silicone and Viton withstand the highest continuous service temperatures, up to 305°C and 200°C respectively.
  • Cold Performance: Silicone and Viton perform excellently in cold conditions.
General Guidance: The document notes that these properties are provided for general guidance and recommends contacting the supplier for specific requirements.
See more

Catalog excerpts

Material properties chart -1

Southbourne Rubber Precision elastomeric sealing products Common Name Physical Properties Specific Gravity (base material) Tear Resisitance Abraision Resistance Rebound - Cold Dielectric Strength Electrical Insulation Adhesive Properties Water Absorbtion Sunlight Ageing Heat Ageing (continuous service limits °C) Very Good Very Good Excellent Excellent Excellent Fairly Low Fairly Low Very Low Good Good Good Very Good Very Good Very Good Good Fair Excellent Poor Poor Excellent Poor Poor Very Good Good Fair to Good Very Good Excellent Very Good Good Very Good Very Good Very Good Very Good Very Good Very Good Poor Fair Excellent Excellent Fair Poor Good Outstanding Excellent Good Fair Fair to Good Fair Fair Fair Exellent Fair to Good Good (3) Good Poor to Fair Excellent Good (2) Good Good P oor to Fair Good Good Excellent Excellent Good Excellent Fair to Good Fair to Good Good Fair Fairly Low Very Low Fairly Low Fairly Low Fairly Low Fair Good Fair Fair Fair Excellent Very Good Good (1) Very Good Good Excellent Outstanding Excellent Excellent Good Excellent Outstanding Excellent Outstanding Very Good Excellent Outstanding Good Outstanding Good Outstanding Outstanding Good Excellent Very Good Outstanding Good Excellent Good Fair to Good Very Good Very Good Very Good Very Good Provided for general guidance only, contact us at sbr.aero for any specific requirements you may have. 1

 Open the catalog to page 1

All Southbourne Rubber catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About AeroExpo
AeroExpo is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. AeroExpo is an entity of VirtualExpo Group.