6530
6530
- Heat Seal Locations:
- Right leg, close to side seam, 1 cm above HV emblem
- Rear side of left leg, centered between reflective 40x120 mm
- Left leg in line with placement 10
- Rear side of right leg, centered between reflective 40x120 mm
- Left hip
- Rear side of right leg, centered between reflective 40x120 mm
- Right leg, centered 2 cm above pocket seam, 1 cm from HV emblem
- Left leg, centered 2 cm above pocket seam
- To maintain Class 2 certification, adhere to the maximum logo size specified in the accompanying table.
- Exceeding recommended logo size may result in non-compliance with EN 20471 Norm.
- Add 'B' after the placement for below orientation (e.g., 1B)
- Add 'Y' for bottom to top orientation
- Add 'Z' for top to bottom orientation
- XS: 10 cm2 (3x3 cm)
- S: 230 cm2 (15x15 cm)
- M-XXXL: 490 cm2 (22x22 cm)
Catalog excerpts
Jnickeff WORKWEAR Logo Placements 6530 High-Vis WP Trousers, Class 2 Size cm2 cm Recommended logo placements Heat seal 10 Right leg, close to side seam, 1 cm above HV emblem 11 Rear side of left leg, center between reflecitve 40x120 mm 15 Left leg in line with with placement 10 16 Rear side of right leg, center between reflecitve 40x120 mm 17 Left hip 18 Rear side of right leg, center between reflecitve 40x120 mm 100 Right leg, centered 2 cm above pocket seam, 1 cm from HV emblem 101 Left leg, centered 2 cm above pocket seam To maintain the Class 2 certification, see maximum logo size in table to the right. If you choose a logo bigger than our recommendation, we do not guarantee that the garment meets the EN 20471 Norm. Add B after the placement and it will be below the (1B) Y and it will be turned from bottom to top Z after the placement and it will be turned from top to bottom
Open the catalog to page 1
