6131
6131
- Heat Seal: Centered at right hip-pocket (18), Centered at left holster pocket (42).
- Heat Seal & Embroidery: Right leg (10).
To maintain the Class 1 certification, the maximum logo size must adhere to the EN 20471 Norm. If a logo exceeds the recommended size, the garment's compliance with the norm is not guaranteed.
- Add 'B' after the placement for below positioning (e.g., 1B).
- Add 'Y' for a bottom-to-top orientation.
- Add 'Z' for a top-to-bottom orientation.
All logos should be within 3300 cm2 with a maximum dimension of 57x57 cm to maintain classification under EN 20471.
Catalog excerpts
Jnickeff WORKWEAR Logo Placements 6131 High-Vis Shorts, Class 1 Size cm2 cm Recommended logo placements Heat Seal 18 Centered at right hip-pocket. 42 Centered at left holster pocket. Heat seal & Embroidery 10 Right leg To maintain the Class 1 certification, see maximum logo size in table to the right. If you choose a logo bigger than our recommendation, we do not guarantee that the garment meets the EN 20471 Norm. Add B after the placement and it will be below the (1B) Y and it will be turned from bottom to top Z after the placement and it will be turned from top to bottom
Open the catalog to page 1
