Manual clamping and radial setting of jaws ■ 4 jaws (all diameters) Ordering example 4 jaws independent chuck PTF 1600 / Z720 Id. No. 77137063 Option: 5:1 torque multiplier Id. No. 13506320 Application/customer benefits • Clamping of large round, square and irregular parts • Manual, radial setting of component and manual clamping • Suitable for vertical machines. Strong body and master jaws design and option to easily mount a strong center point • High gripping force allowed by the strong design, with the option to increase it with a torque multiplier • TONGUE & GROOVE master jaws (type “American Standard") Technical features • Manual gripping force applied by a strong and protected screw on a strong and rigid master jaw • Manual and fine setting of master jaws for workpiece centering • Protection from contamination with seals along the master jaw profiles • Possibility to use jaw boxes for manual clamping mounted on the T-slots between the master jaws Standard equipment 4 jaws independent manual chuck 1 set of soft top jaws 1 regulation and actuation key 1 grease gun and 500g grease Soft and hard top jaws for PTF Optional 5:1 Torque multiplier To achieve the maximum gripping force and speed, the easiest and more confortable way is to use this multiplier that will increase 5 times the input torque. Id. No. 13506320 A Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce operating torque / rotating speed accordingly. Technical data SMW-AUTOBLOK Type

TONGUE & GROOVE Manual clamping and radial setting of jaws High precision 4 jaws independent manual chucks 0 1000 - 2000 mm ■ Closed center ■ 4 jaws (all diameters) SMW-AUTOBLOK Type