HG-N
6Pages

Chuck takes same jaws as KNCS-N For highest speeds Flat gripping force curve 180 ■ Jaw change in less than 1 minute FG total gripping force (3 jaws) (kN) ■ The max. gripping force is the total, acting on the 3 jaws, obtained by applying to the chuck the max. allowed driving torque. The data refers to a chuck newly maintained accordingly to their service manual, using SMW K05 grease. 260 240 220 ■ Universal, because jaws can be radially adjusted and reversed = less jaw sets FG total gripping force (3 jaws) (kN) ■ The dynamic gripping forces have been measured using hardened standard stepped monoblock jaws type GST placed in a position not exceeding the outer diameter of the chuck. Jaws radially adjustable 19E Safety advice / danger of damage: When using taller / havier jaws and / or clamping on a more external position reduce driving torque / rotating speed accord

manual chuck HI-GRIP Direct mounting Wedge bar design guarantees highest precision, concentricity and repeatability as well as highest gripping forces Safety pin indicates correct jaw stroke position ■ No reboring of already machined jaws necessary, because of runout < 0.02 (e.g. HG-N 210) Recess and bolt circle to DIN 55026 / ISO-A 702/1 Safety jaw release with interlock Chuck body is case hardened for highest rigidity, precision and durability SMW-AUTOBLOK 9

QUICK JAW CHANGE Jaw system original SMW Main dimensions and technical data Jaw position: open position for external clamping C1 Subject to technical changes. For more detailed information please ask our customer service. SMW-AUTOBLOK Type HG-N Mounting g Thread / thread depth Base jaw tooth pitch Max. total gripping force At max. torque Md Speed Weight without jaws Moment of inertia

QUICK JAW CHANGE Jaw system original SMW Ordering review Chuck with center mounting DIN 6350 HG-N Chuck with ISO-A mounting DIN 55026 HG-N Chuck with bayonet mounting DIN 55027 Type C HG-N Chuck with Camlock mounting DIN 55029 Type S HG-N Parts included: Fixing elements (screws resp. studs resp. camlock bolts).

QUICK JAW CHANGE Chuck GBK Hardened base jaws N WAKS Wide soft top jaws UVB Soft monoblock jaws GST Hardened stepped monoblock jaws H Clamping ranges JAWS-CATALOG Request or download: www.smw-autoblok.de

QUICK JAW CHANGE Chuck GUA Hardened reversible stepped top jaws T H Clamping ranges Base jaw position ”o“ "o" JAWS-CATALOG Request or download: www.smw-autoblok.de Important for maintenance and safe operation, to be ordered with the chuck Grease K05® Special grease for manual and power chucks Cartridge 14 Oz. (DIN 1284) Grease content 500 g Id. No. 016440 Grease gun Grease gun (DIN 1283) for cartridges 14 Oz. (DIN 1284) ■ Also refillable from grease can 1000 g High adhesion High resistance against coolant High load bearing capacity Low friction coefficient High gripping force Avoids...