*myaeroexpo

CL-C, CL-D

Product catalog summary

Overview:
This document provides technical specifications and application details for SMW-AUTOBLOK high precision power chucks, specifically models CL-C and CL-D, which are designed for gripping or handling irregularly shaped pieces on special and vertical machines.

Specifications:

Models: CL-C (Ø 80-160 mm) with TONGUE & GROOVE master jaws, CL-D (Ø 200-315 mm) with INCH SERRATION master jaws.
Technical Features: Extra long stroke per jaw, gripping force transmission via wedge hook, sealed against swarf and chips.
Standard Equipment: Includes 2 jaw chuck and 4 T-nuts with bolts for Ø 200-315 mm models.

Technical Data:

Number of Jaws: 2
Radial Jaw Stroke: Varies by model
Axial Piston Stroke: Varies by model
Max. Draw Pull: Varies by model
Max. Gripping Force: Varies by model
Max. Speed: Varies by model
Weight: Varies by model
Moment of Inertia: Varies by model

Application/Customer Benefits:

Suitable for gripping irregularly shaped pieces.
Ideal for use on vertical machines.

Safety Advice:

When using taller/heavier jaws or clamping on a larger diameter, reduce draw pull/rotating speed accordingly.
Data in diagrams refer to 2 jaw chucks maintained with SMW-AUTOBLOK K05 grease.

Ordering Information:

Example: 2 jaw chuck CL-D 250 / A8 or 2 jaw chuck CL-C 100 / Z92.

Additional Notes:

Subject to technical changes. For more detailed information, contact customer service.

Catalog excerpts

CL-D High precision power chucks 0 80 - 315 mm INCH SERRATION Ordering example 2 jaw chuck CL-D 250 / A8 or 2 jaw chuck CL-C 100 / Z92 i Long stroke i Closed center i 2 jaws Application/customer benefits • Gripping or handling of irregular shaped pieces, for example on special machines • Suitable for vertical machines CL-C: TONGUE & GROOVE master jaws DIN standard (0 80-160 mm) CL-D: Master jaws with INCH SERRATION (1/16“ x 90°) (0 200-315 mm) Technical features • Extra long stroke per jaw • Gripping force transmission via wedge hook • Sealed against swarf and chips Standard equipment 2 jaw chuck 4 T-nuts with bolts (0 200-315 mm) Without top jaws The data in the diagram refer to 2 jaw chucks, newly maintained according to their service manuals using SMW-AUTOBLOK K05 grease. The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck. A Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull / rotating speed accordingly. SMW-AUTOBLOK Type * For internal clamping reduce the draw pull by 30%.

Open the catalog to page 1