Vacuum Casting Systems

Product catalog summary

Introduction
Vacuum casting systems are utilized for producing parts in materials such as PU, Nylon, and Wax. These systems enable fast and accurate production of prototype parts and small series production, offering significant time and cost savings compared to traditional manufacturing methods.

Specifications
The document outlines the system parameters for vacuum casting systems, including:

Dimensions: 1930 x 1510 x 900 mm
Max Mould Size: 750 x 900 x 750 mm
Casting Capacity: 2.2 l; 5.5 l (twin robot)
Pump Capacity: 65 m³/h
Ultimate Vacuum: 0.5 mbar
Weight: Approximately 1150 kg
Electrical Connection/Consumption: 3 Phase, 400 Volt 3NPE, 3.5 KW/h

Other power supply configurations are available upon request.

Procedures and Advantages
Vacuum casting is employed in rapid prototyping to enhance quality and significantly reduce delivery times, achieving up to 97% cost reductions. The process is straightforward, contributing to its global success in prototype manufacturing. The Nylon Module uses five basic ingredients to create various grades, allowing for the addition of fillers for strength and pigmenting materials without altering the color.

Performance
Parts and molds can be produced in approximately 30 minutes, with mold life ranging from 15 to 30 castings per mold, depending on complexity. Vacuum casting offers significant performance advantages over plastic sintering technologies.

Contact Information
SLM Solutions GmbH
Roggenhorster Straße 9c, 23556 Lübeck, Germany
Phone: +49 (0) 451-160 82-0
Fax: +49 (0) 451-160 82-250
Email: [email protected]
Website: www.slm-solutions.com

Catalog excerpts

Vakuumgießsysteme Vacuum Casting Systems Vakuumgießanlagen für Teile in Kunststoff, Nylon und Wachs Schnelle, präzise Anfertigung und Vervielfätigung von Prototypen und Kleinserien Vacuum Casting Systems for Parts in PU, Nylon and Wax Fast and accurate production and multiplication of prototype parts as well as small series production

Open the catalog to page 1

© SLM Solutions GmbH 6/2012 . Printed in Germany. We reserve the right to alter technical speciﬁcations without rior notice. All products are (registred) trademarks. Änderungen und Irrtümer vorbehalten. Alle genannten Produkte sind (eingetragene) Warenzeichen. Vakuumgießsysteme Vacuum Casting Systems Das Vakuumgießen wird im generativen Rapid Prototyping zur Optimierung der Qualität und deutlichen Reduzierung von Lieferzeiten eingesetzt. Verglichen mit traditionellen Fertigungsmethoden werden Zeit- und Kostenersparnisse bis 97% erzielt. Daher hat sich das Vakuumgießverfahren als perfekte Lösung...

Open the catalog to page 2

All SLM SOLUTIONS GMBH catalogs and technical brochures

Archived catalogs

SLM 125
5 Pages