STM.650.PP.02.01 • Halogen 2 Lamp PAPI Unit STM.650.PP.02.02 • Halogen 3 Lamp PAPI Unit Related Standards and Compliances ICAO : PAPI is in accordance with Annex 14, Vol.1 para 5.3.5.23 to 5.3.3.45 Application PAPI enables the pilot precisely determine the approach angle., helps landing day and night in average conditions without the need for no other instruments. Features • Aerodynamic and small in size. • 1000 hours HALOGEN lamp rated life at full intensity, but over 3000 hours in field operating conditions Long lamp life (50.000 hrs) with LED lamp 2x100W. •Mounting and calibration are done easily with special equipment. • Sharp transition from while to red and the intensity changes less than 3 times throughout the the full beam width. • Waterproof dust proof thanks to the sleeve gasket, internal water drained through outlets. • Hardened front glass against stones and other flying particles thrown by the aircraft. • One cable lead for each lamp. Technical Specifications • Protection Degree : IP44 • Relative Humidity : up to %100 • Working Temperature : -55 C to +55 C • Power Consumption : For LED 2x100W 220V 50Hz or 6,6A SC. For HALOGEN BULB 2x200W-6,6A Options • Solar PV panel powered • RF Remote control

STM.650.PP.02.01 • Halogen 2 Lamp PAPI Unit STM.650.PP.02.02 • Halogen 3 Lamp PAPI Unit System is mounted according to mounting instructions on to the concrete base where the mounting bolts are anchored. Packing Info • In cardboard boxes of 62x40x100cm • Phosphating and baked polyester electrostatic powder coating • The color is aviation yellow and hardware is made of stainless steel • Aluminum tubing • Net weight is 24 KG