SIMVAC S
1Pages

Thanks to CVBM IV modulating technology, the unit's compressor can adapt to a wide range of incoming water temperatures as well as a wide range of airflows to the simulator cockpit. This means it can be cooled with an optional closed loop liquid cooler or with a central liquid cooler already installed in the field. Moreover, the modulating feature also applies to a variable airflow blower and ensures perfect and constant airflow to each cockpit air outlet, no matter how many outlets are open or closed. Here are the specs: Electrical: - Mains: 400Vac 3Ph, + Neutral... 240Vac 1Ph option is available - 24V transformer included for standard thermostat control. "Y" terminal input as per standard HVAC spec for cooling demand. "C" and "R" terminals for thermostat power supply. Mechanical: - Dedicated sheet metal cabinet, minimum footprint - Robust construction - Easy maintenance and service access doors - Soundproofing material used all over the HVAC unit inside making it very quiet Ventilation: - Rosenberg EC Backward inclined blower - Blower is controlled in constant static pressure mode at +3.5"H2O (field adjustable) - -Blower is constantly "ON" when the unit is powered - Supply air port is 12" dia. Designed for easy attachment of flexible ducts adapted for full-flight simulator requirements. - Easy access air filter Refrigeration: - Variable speed Mitshubishi BLDC compressor. 36 000Btu/Hr max cooling capacity. - Carel Drive for compressor speed control - Electronic expansion valve from Carel - Calorek's proprietary advanced heat pump electronic control with Flight Sim specific firmware - No freeze system thanks to Calorek's electronic control. The compressor speed is modulated in order to avoid freezing the coil no matter what airflow is passing through it. - Choice of water-cooled or external condenser unit - If water-cooled, an external fluid cooler is available as an option. It includes the Fluid Pump, Fluid Cooler (Exchanger Coil and Fan) and Expansion Tank. - If a condenser unit option is chosen, customers need a qualified technician to connect the HVAC unit to the condenser unit. The HVAC unit will be precharged with the correct amount of refrigerant for 25' length lines to the condenser unit. Additional refrigerant may be needed for longer linesets. Service valves provided. - Dedicated terminal block provided for Thermostat connection ("Y", "C", and "R" terminals) Maintenance software: - Labview-based maintenance software can be provided. Used for diagnosis of the machine and air pressure set-points adjustments as per application needs. Easy-to-use interface. Connect via USB with any laptop. Software installer is loaded on the USB key provided with each unit. Technical support: - Calorek will provide phone technical support as required Warranty: 5 Years, parts only