Simulator manufacturing

SIMNEST is a brand name for our simulator solutions, the company behind it is PearWilliams and we are aviation professionals who pay attention to detail and training trends. Our vision is to create high quality and affordable flight simulator solutions for the continuously growing pilot training market. Our belief is that FNPT II MCC simulators and MCC trainings are not just a course to do. MCC training is a base that an airliner pilot can rely on, can build on, can evolve from. In case you use the right tool for this training – like our FNPT II MCC certified SN.A32 simulator – your cadets will...

ARE YOU AN ATO? ARE YOU AN FSTD OPERATOR? DO YOU DO MCC TRAININGS? No problem if your answer is NO to any of the questions above! WOULD YOU LIKE TO MAKE YOUR CADETS LIFE EASIER? PREPARE THEM FOR THE TYPE RATING, FOR ASSESSMENT? DO ALL OF THIS COST EFFECTIVELY? SIMNEST SOLUTION IS HERE TO HELP WITH YOUR GOALS! With our trainer friendly A32 FNPT II MCC simulator you will be able to provide A320 specific trainings. It replicates accurately the A320 cockpit and its flight characteristics: properly simulates the aircraft logic, the FBW characteristics. WHAT YOU WILL NEED TO OPERATE THIS SIMULATOR:...

COCKPIT, FLIGHT CONTROLS AND SYSTEMS • Dual MCDU • ECAM, Engine Display, PFD, ND, etc. • FCU with dual EFIS • Glareshield • Sidesticks, pedals and nose steering wheel with Fly by Wire Operation • TCAS, Radar • Flaps, Speedbrake • Overhead Fwd panel • Full Backlight Systems and Throttle • Fully adjustable pilot seats • Two observer seats behind the two pilots and the instructor QTG • The simulator is delivered with a "Qualification Test Guide" (QTG) • based on NORMAL and DIRECT laws SIMULATED FAILURES • Truly degrading the affected component, with all the side effects • All failures can be triggered...

3 CHANNEL CYLINDRICAL VISUAL 210° * 45° • 3 Full HD Projectors • Total immersion during exercise • Warping and edge blending included TERRAIN, NAVIGATION & AIRPORT DATABASE • Worldwide terrain database • Easily recognizable geographical features: mountains, coastlines and urban areas • The navigation database includes en-route and approach navaids • SIDs / STARs • 5 Reference airports IOS WITH TOUCH SCREEN AND SPEED BUTTONS • Failures • Weight and balance, fuel quantity, ZFW, etc. • Atmospheric and visual conditions can be changed in real time • Track plots available and printable • Flight pause,...

TURNKEY SOLUTION • 24 months' warranty • Shipping, installation, insurance & testing on customer premises • Maintenance technicians and instructors training • MQTG, Instructor Manual, Maintenance manual, Flight Manual is provided • Spare part set according to the EASA regulations • Ensuring educational syllabus for ATOs, suitable for • EASA authorization • In addition to the standard set of documentation, ensuring operational syllabus for ATOs and FSTD operators OPTIONAL MAINTENANCE SERVICES • Yearly support for recurrent certification assistance and system check • Remote maintenance • Telephone...

SIM NEST ROOM DIMENSIONS & REQUIREMENTS The total width of the device is determined primarily by the width of the projection screen. • The width of the projection wall is 550 cm • The total length including the wall, the cockpit, IOS and observer seats is 500 cm • The height of the projection wall is 320 cm In case you would have different room dimensions available let us know and we can make calculations for you. POWER CONSUMPTION The power consumption of the device is around 4700W - excluding the air conditioner. Main consumers are: • the 3 projectors • the main PC • the control loading system...

1. AIR ATA 1.1 PRESS SYS 1/2 FAULT 1.2 RAPID DECOMPRESSION 1.3 PACK 1/2 FAULT 1.4 PACK 1/2 OVHT 2. OXYGEN ATA 2.1 COCKPITOXYGENLOW PRESSURE 3. AUTOFLIGHT ATA 3.1 AP 1/2 FAIL 3.2 ATHR FAIL 3.3 FAC 1/2 FAIL 3.4 AUTOLAND FORCED FLASHING 3.5 NO LAND MODE 3.6 NOFLAREMODE 3.7 FCU 1/2 FAULTS 4. ELEC ATA 4.1 DC BUS 1/2/BAT FAULT 4.2 AC BUS 1/2 FAULT 4.3 TR 1/2 FAULT 4.4 GEN1/2 FAULT 4.5 IDG 1/2 OIL LO PR 4.6 IDG 1/2 OIL OVHT 5. FCTL ATA 5.1 ELAC1/2FAULTS 5.2 SEC 1/2/3 FAULTS 5.3 FLAPS/SLATS LOCKED 6. DOORS ATA 6.1 OPENING AND CLOSING OF ALL DOORS 6.2 ARMING OF SLIDES 6.3 IFDOORISOPENEDINFLIGHT, ECAM...

pear williams