Heliport Controller V3
7Pages

{{requestButtons}}

Catalog excerpts

Heliport Controller V3 - 1

Airport Heliport +40 254 515 465 office@signalight.com 36 Lunca Street, Petrosani, Romania www.signalight.com

Open the catalog to page 1
Heliport Controller V3 - 2

Airport Heliport ICAO: Annex 14, Volume II - Heliports EMC emission: EN55032 (CISPR32) Class B EN61000-3-2 Class A EN61000-3-3 EAC TP TC 020 EMC immunity: EN61000-4-2,3,4,5,6,8,11 EN55024, light industry level, criteria A EAC TP TC 020 Heliport lights power supply Aiming Point Lights FATO Lights Approach Lights Taxiway Lights TLOF Lights Beacon Light

Open the catalog to page 2
Heliport Controller V3 - 3

Airport Heliport The controller has 8 different circuits ON/OFF factory configurable: 48V DC - max 500W, dimmable 1,4A constant current - max 500W, dimmable 230V AC - max 2000W - not dimmable The system can be controlled in four different variants, as follow: Front-panel buttons Remote console through RS485 protocol communication GSM communication ARCAL remote control Settings: Brightens level control (dimming) - 10%, 30% and 100% Stand by Total OFF Circuits ON/OFF LCD Display showing: Voltage Total power - Watt Brightness level System Status Individual circuits ON or OFF Errors occurred...

Open the catalog to page 3
Heliport Controller V3 - 4

Airport Heliport AL - 078 - AX Series Indicator (Airfield Lighting) Product Indicator Description of product type (accessory) Product Code Housing - powder-coated metal (gray) Cable gland - nickel plated brass When the lighting system includes a heliport beacon, the above intensities will automatically be changed for the beacon. So when the system will run at 10% power, the beacon will run at 3%, at 30% power, the beacon will run at 10% and 100% power is for both the beacon and the other lights(ref. ICAO 5.3.2.5). Light fixtures with 110-230V 50-60Hz power supply are turned OFF when the...

Open the catalog to page 4
Heliport Controller V3 - 5

Airport Heliport Power supply Output voltage/current Max output power per channel 2000W (230V AC output voltage) 500W (48V DC output voltage) 500W (1,4A output current) Electrical protection Short circuit Over load Over voltage EMI filter SPD protection Electrical Characteristics CAUTION: Ground must be connected to avoid electrical injury and to ensure a proper functionality for surge and EMI protection! Front Panel Descriptions Off / Standby / brightness level selection buttons 7 chanels selection buttons Mains power switch

Open the catalog to page 5
Heliport Controller V3 - 6

Airport Heliport To order accessories please call our customer support. For contact details please refer to our website - www.signalight.com

Open the catalog to page 6
Heliport Controller V3 - 7

+40 254 515 465 office@signalight.com 36 Lunca Street, Petrosani, Hunedoara County, Romania www.signalight.com

Open the catalog to page 7

All Signalight catalogs and technical brochures

  1. Low Profile

    3 Pages

  2. GPI

    7 Pages

  3. Clinometer

    13 Pages

  4. Base Plate

    3 Pages

  5. PULSAR

    9 Pages

  6. BEACON

    8 Pages

  7. WAGGY

    6 Pages