1. Catalogs
  2. Signalight
  3. Flat-ALIGNMENT-FD

Flat-ALIGNMENT-FD

Flat-ALIGNMENT-FD

Flat-ALIGNMENT-FD

Product catalog summary
Overview
This document provides technical specifications and guidelines for the installation and maintenance of heliport lighting systems, specifically focusing on TLOF (Touchdown and Lift Off Area Perimeter) and alignment guidance lighting systems. The systems comply with ICAO Annex 14 standards and IEC TS 61827 for electrical installations.
Specifications
  • High power LED technology is used for energy efficiency and environmental friendliness.
  • Light fixtures are lightweight, primarily constructed from aluminum alloys.
  • Temperature range for operation is -550 to +550 degrees.
  • Protection degree is IP X8, with salt mist resistance as per IEC standards.
Product Details
  • Product Code: AL-075-03-WH-FD
  • Housing: Powder-coated aluminum in aviation yellow.
  • Dispenser: Hardened glass with a nickel-plated ring.
  • Light fixtures include anti-condensation valves and UV protection.
Power Supply
  • 48V DC from a controller or 230V AC from mains.
  • Cables are protected by an aluminum profile and connected via an IP65-rated junction box.
Mechanical Characteristics
  • Dimensions: 200 mm length/width, 23.5 mm height.
  • Weight: 2.5 kg.
  • Power consumption: 6W.
Photometric Characteristics
  • Intensity levels: 100%, 30%, 10% with a 48VDC controller.
  • Horizontal output: 360°.
  • Light color: Green, with compliance to ICAO color range requirements.
Accessories and Spare Parts
  • Various spare parts such as stainless steel screws, nickel-plated disperser flanges, and hardened glass dispersers are available.
  • Contact customer support for ordering accessories.
See more

Catalog excerpts

Flat-ALIGNMENT-FD-1

Constructive variant for metal platforms +40 254 515 465 [email protected] 36 Lunca Street, Petrosani, Romania www.signalight.com

 Open the catalog to page 1
Flat-ALIGNMENT-FD-2

ICAO: Annex 14, Volume I - Aerodrome Design and Operations Annex 14, Volume II - Heliports IEC TS 61827: Electrical installations for lighting and beaconing of aerodromes. Characteristics of inset and elevated luminaires used on aerodromes and heliports TLOF lights (Touchdown and Lift Off Area Perimeter) and ALIGNMENT guidance lighting system. Aiming Point Lights FATO Lights Approach Lights Taxiway Lights TLOF Lights Beacon Light Designed and built with simplicity and ease of maintenance in mind. High power LED technology. Lightweight, low-energy and environment friendly lighting fitting. Extensive...

 Open the catalog to page 2
Flat-ALIGNMENT-FD-3

Product Code Housing - Powder coated aluminium RAL 1004 (aviation yellow) Dispenser - hardened glass Dispenser flange - nickel plated ring Cable gland - nickel plated brass Fasteners - stainless steel Light fixtures are provided with anti condensation valve. Light fixtures are UV protected. Temperature range: Degree of protection: Ka tested: Salt mist Light fixtures are designed to be mounted on any hard flat surface, such as: • concrete • asphalt • metallic structures

 Open the catalog to page 3
Flat-ALIGNMENT-FD-4

Lenght/Width : Height: Weight: Mechanical Characteristics Installation of lighting fixture and cable protection: • with M10 welded bolts on the metalic platform • with M10 threaded holes in the metal platform Power consumption 6W Power supply 48V DC from controller - dimmable : 100% ,30%, 10% 90-230V, 50/60Hz - non dimmable Electrical Characteristics Types of power supply : • 48V DC power supply from controller with 3 core cable V+ (brown) V- (blue) Dimming (green/yellow) • 230V AC directly from mains power supply Live (brown) Neutral (blue) Ground (green/yellow) The light fixtures will be provided...

 Open the catalog to page 4
Flat-ALIGNMENT-FD-5

100%, 30%, 10% with controller in 48VDC 360° Green light Intensity level: Horizontal output: Light colour: Vertical elevation angle Required minimum intensity [cd] Measured minimum intensity [cd] Inset - HELY - TLOF and Alignement ver�cal light distribu�on - white light 60 50 40 30 20 10 Photometric Characteristics ICAO requirement Minimum Light Intensity The brightness intensity values complies with : ICAO requirements Annex 14 Vol.2 fig.5-11/6 The light colour emitted by the light fixture is white, with the trichromatic coordinates: 0.9 0.8 The measured trichromatic coordinates correspond to...

 Open the catalog to page 5
Flat-ALIGNMENT-FD-6

To order accessories please call our customer support. For contact details please refer to our website - www.signalight.com

 Open the catalog to page 6
Flat-ALIGNMENT-FD-7

M5*8 Stainless steal Allen Screw Nickel-plated disperser lange Silicone disperser gasket M10*100 Stainless steal Allen Screw Hardened glass disperser Spare Parts Aluminium light ixture body Nickel-plated cable gland

 Open the catalog to page 7
Flat-ALIGNMENT-FD-8

+40 254 515 465 [email protected] 36 Lunca Street, Petrosani, Hunedoara County, Romania www.signalight.com

 Open the catalog to page 8
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.