SS5000 Series Miniature High Output Tension Load Cell

Product catalog summary

Description
The SS5000 series are miniature tension load cells based on strain gauge technology with integral amplification for high-level signal output. Constructed from stainless steel, they offer high resistance to overload, shock, and corrosion. The transducer is temperature compensated and uses precision bonded strain gauges. It includes an integral multi-conductor cable.

Specifications

Type Number: SS5000
Operational Mode: Tension
Recommended Excitation Voltage: ±15 VDC
Minimum Excitation Voltage: ±13 VDC
Operating Current: 22 mA
Output Load: Minimum 5000 Ohms
Full Scale Load: 250, 500, 1000, 2000 N
Maximum Load Without Damage: 375, 750, 1500, 3000 N
Full Scale Output: 0 to 10 ±2% Volts
Non-Linearity: ±0.25% Full Scale
Non-Repeatability: ±0.01% Full Scale
Hysteresis: ±0.05% Full Scale
Zero Balance: ±0.15 Volts
Frequency Response: 100 Hz minimum

Environmental

Operating Temperature Range: -25 to +75 °C
Compensated Temperature Range: -40 to +85 °C
Environmental Protection Level: IEC529 IP65
Thermal Zero Shift: 0.02% Full Scale/°C (max)
Thermal Sensitivity Shift: 0.02% Reading/°C (max)
Emissions: BS EN 55011:1998
Immunity: BS EN 61000-4-2:1995, IEC 6100-4-2:1995, BS EN 61000-4-3:2002, BS EN 61000-4-4:2004, BS EN 61000-4-11:2004

Miscellaneous

Electrical Connection: 5 metre integral cable
Wire Colors: Red (Supply +ve), Blue (Supply –ve), Green (Output Tension +ve), Yellow (Common 0v)
Documentation: Individual calibration data sheet
Dimensions: See Drawing A3/OL/22283

Ordering Information
Order by Part No and range: e.g., SS5000-500N

Note: SS5000-2000N utilizes an M8 thread.

Catalog excerpts

SS5000 Series Miniature High Output Tension Load Cell-1

Description The SS5000 series are miniature, strain gauge based tension load cells with integral amplification providing a high level signal. They are machined from stainless steel and have unusually high resistance to overload, shock and corrosion. The transducer is fully compensated for the effects of temperature on the zero output and sensitivity and employs precision transducer quality bonded strain gauges as the primary transduction element. The load cell is fitted with an integral multi-conductor cable. Specifications 1 Ringway Centre, Edison Road, Basingstoke, Hampshire, RG21 6YH, United Kingdom Tel: +44 (0) 870 444 0728 Fax: +44 (0) 870 444 0729 Email: [email protected] Website: www.sherbornesensors.com

Open the catalog to page 1

SS5000 Series Miniature High Output Tension Load Cell-2

Outline Dimensions: **NOTE: SS5000-2000N utilizes an M8 thread Ordering Information: Order by Part No and range: SS5000-500N 1 Ringway Centre, Edison Road, Basingstoke, Hampshire, RG21 6YH, United Kingdom Tel: +44 (0) 870 444 0728 Fax: +44 (0) 870 444 0729 Email: [email protected] Website: www.sherbornesensors.com

Open the catalog to page 2

SS5000 Series Miniature High Output Tension Load Cell

SS5000 Series Miniature High Output Tension Load Cell

Catalog excerpts

All Sherborne Sensors catalogs and technical brochures