LED Medium-intensity Type A L865 Aviation Obstruction Light AH-MI-A2

Product catalog summary

Application
This document describes the LED Medium-intensity Type A L865 Aviation Obstruction Light, designed for marking obstacles between 105-150 meters in height. It uses ultra-high intensity CREE LEDs for long life and performance, with a self-designed reflector to optimize light intensity and power consumption.

Compliance
The light complies with ICAO Annex 14 Volume 1, Seventh edition, 2016, and FAA L-865 standards.

Features

Electrical: Utilizes CREE LEDs, available in DC (12V, 24V, 48V) or AC (110-240VAC).
Physical: Features a UV-protected polycarbonate reflector and a die-cast aluminum base for corrosion resistance and shock protection.
System Design: Includes a built-in photocell for day/night operation and surge protection.
Optional: Offers dry contact alarm output, GPS synchronization, and infrared LED for NVG use.

Specifications

Light Characteristics: White color, ≥20,000cd intensity during the day, ≥2,000cd at night, 360-degree horizontal output, and 3-degree vertical divergence.
Electrical Characteristics: Operates on DC or AC, with instantaneous power of 600W and average power of 20W at 20 flashes per minute.
Physical Characteristics: Made from UV-protected polycarbonate and powder-coated die-cast aluminum, with a product life expectancy of over 5 years.
Environmental Factors: Operates in temperatures from -40 to 55°C, with a wind speed tolerance of 240Km/h and IP66 waterproof rating.

Options Available
Includes various flashing rates, NVG compatibility, GPS sync flashing, RS485 communication, and bird deterrent spikes.

Configuration
The model AH-MI-A2 offers various power inputs, flash rates, and control options, with factory settings provided unless specified otherwise.

Catalog excerpts

LED Medium-intensity Type A L865 Aviation Obstruction Light AH-MI-A2-1

LED Medium-intensity Type A L865 Aviation Obstruction Light AH-MI-A2 IP66 This LED Medium-intensity Type A L865 Aviation Obstruction Light flashing white color, designed for marking top of obstacle which height is between 105-150 meters. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption. Compliance • ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium Intensity Type A Obstruction Light • FAA L-865 Features Electrical • CREE ultra high intensity LED as light source saving power consumption and maintenance than incandescent light or halogen lamp • Power supply available in DC(12V, 24V, 48V) or AC(110-240VAC) Physical • Unique design and UV protected polycarbonate reflector for converging light • UV protection Powder coated bright yellow color base make better visibility • Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection • Special valve installed beside the base to make sure the air could go through but water is avoid, so that the whole light temperature won’t be high System design • Built-in photocell for day/night operation(dusk to dawn operation) • Surge and lightning protection Optional • Dry contact Alarm output for remote monitoring • GPS synchronization • Infrared LED for pilot using NVG Application • AH-MI-A2 medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is between 105-150 meters, and most time work with low intensity lights & medium intensity type B light installed on the lower place. ANHANG TECHNOLOGY Tel/Fax: +86-755-89589401 Email: [email protected] Website: www.annhuna.com DOC: DT2020AHMIA2MAOL ) Anhang Technology 2016 | All rights reserved

Open the catalog to page 1

LED Medium-intensity Type A L865 Aviation Obstruction Light AH-MI-A2-2

Dimension(mm) LED Medium-intensity Type A L865 Aviation Obstruction Light AH-MI-A2SPECIFICATIONS AH-MI-A2 LED Medium-intensity Type A L865 Aviation Obstruction Light Installation Light Characteristics Light Source Available Colors Intensity(cd) Horizontal Output(degrees) Vertical Divergence(degrees) Flash Characteristics Operation Mode LED Life Experience(hours) Electrical Characteristics Operating Voltage Instantaneous power(W) Average Power(W) Lightning surge Electrostatic Circuit Protection Physical Characteristics Body Material Base Material Mounting Dimension(mm) Weight(kg) Product Life...

Open the catalog to page 2

LED Medium-intensity Type A L865 Aviation Obstruction Light AH-MI-A2-3

LED Medium-intensity Type A L865 Aviation Obstruction Light V AH-MI-A2Configuration Model Tel/Fax: +86-755-89589401 Email: [email protected] Website: www.annhuna.com DOC: DT2020AHMIA2MAOL © Anhang Technology 2016 | All rights reserved

Open the catalog to page 3