Heliport Lighting
22Pages

{{requestButtons}}

Catalog excerpts

Heliport Lighting - 1

The LED Visual Approach Slope Indicator (VASI) is used to guide aircraft to approach the runway at an appropriate altitude. It is specially designed to accommodate the helicopter's steep angles of descent and deliberate speeds. There are three Colors which to show three wide horizontal beams in different colored light. And it is projected in fan shaped array into the incoming flight pattern. The top beam is yellow which indicates a too high altitude of approach; The center beam is green which is the correct altitude; The lower beam is red which indicates a too low altitude. By staying within the green light beam that is correct altitude. Compliance • ICAO Annex 14 Volume II -Figure 5-11 • FAA AC 150/5390-2B Heliport Design Guide Features Electrical • LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light • Power supply available in AC(110V, 240VAC), DC48V Physical • Unique designed polycarbonate lens for converging light and also provides corrosion resistance and UV protection. • UV protection Powder coated bright yellow color base make better visibility • Base material is stainless steel which has strong corrosion resistance, Shock and Vibrations protection • Fragile coupling reduce the secondary damage to helicopters effectively Optional ~ • Infrared LED for pilot using NVG(Night Vision Goggles) • Controller for power supplying and turn ON/OFF light • VHF pilot to ground remote control • Solar powered system Application • Permanent, Temporary, Emergency Helipad/Heliport/Helideck • OFFSHORE/ ONSHORE USAGE • Military & NVG operations Tel/Fax: +86-755-89589401 Email: sales@annhuna.com Website^w^^nnhun^oim

Open the catalog to page 1
Heliport Lighting - 2

LED Visual Approach Slope Indicator AH-HP-VASIInstallation SPECIFICATIONS ANHANG TECHNOLOGY Tel/Fax: +86-755-89589401 Email: sales@annhuna.com Website: vwvw.an

Open the catalog to page 2
Heliport Lighting - 3

The Helicopter Approach Path Indicator - HAPI system consists of a single lighting to provide a visual indication of the correct approaching path of the helicopter. The HAPI uses patented, LED-based optics to achieve the lowest power consumption, highest intensity and sharpest green/red transition. Compliance • ICAO Annex 14 Volume II -Figure 5-11 • FAA AC 150/5390-2B Heliport Design Guide • CAP 437 APPLICATION Features • The HAPI System has a module with lights which has a lens system that divides the light into 4 separate segments: 1. Flashing Green Light = Helicopter above the optimal...

Open the catalog to page 3
Heliport Lighting - 4

Helicopter Approach Path Indicator (HAPI) AH-HP-HAPI Drawing(mm) SPECIFICATIONS AH-HP-HAPI Helicopter Approach Path Indicator (HAPI) Light Characteristics Light Source Available Colors Intensity(cd) Photometry Working mode Operation Mode LED Life Experience(hours) Electrical Characteristics Operating Voltage Power(W) Circuit Protection Physical Characteristic® Body Material Installation Base Material Mounting Dimension(mm) Weight(kg) Product Life Expectancy Environmental Factors Ambient TemperaturefC) Humidity Wind Speed Waterproof Compliance ICAO FAA Options Available PPROACH LED Green/Red...

Open the catalog to page 4
Heliport Lighting - 5

ANN HUNG The LED CHAPI Heliport Approach Path Indicators (CHAPI) uses LED technology to provide the pilot with safe and accurate glide slope on final approach to the helipad. A set of two LED CHAPI Light Housing Assemblies (LHAs) are seen by the pilot in combinations of white, green and red to indicate a path that is too high, too low or within the 6° +0° 15' glide slope. Solar power system is optional for CHAPI. CHAPI Visual Indication: C€ APPLICATION Compliance • ICAO Annex 14 Volume I 6th Edition dated 2013 clauses, 5.3.5.28 - 5.3.5.40, Figure A2-23 Appendix 1,2.1.1 • FAA AC 150/5390-2B...

Open the catalog to page 5
Heliport Lighting - 6

ANHANG TECHNOLOGY SPECIFICATIONS DOC: DT2018AHHPCHAPI © Anhang Technology 2016 | All rights reserved

Open the catalog to page 6
Heliport Lighting - 7

ANN HUNG The heliport/Airport beacon shall be located on or adjacent to the heliport preferably at an elevated position and so that it does not dazzle a pilot at short range. This Rotated beacons is for night operation as identification and location markers for airports. Compliance • FAA L-801, L-802 150/5345-12F • ICAO Annex 14 Volume I 5.3.3 Features • LED as light source, 5= 100,000 hour typical lamp life. • Two head, Two emitting color • No maintenance • All moving parts are permanently lubricated. • Impedance-protected motor eliminates burnouts. • 12RPM rotation, 24 flashes/minute. •...

Open the catalog to page 7
Heliport Lighting - 8

Dimension(mm) Wiring diagram SPECIFICATIONS AH-HP-R2 Airport Rotating Beacon ANHANG TECHNOLOGY ► Ua&pSharacteristics Light Source Colors The light beam(vertical) The light beam(horizontal) Flash Characteristics Light intensity LED Operation Mode LED Life Experience(hours) Electrical Characteristics Operating Voltage Circuit Protection Physical Characteristics Body Material Base Material Mounting Dimension(mm) Weight(kg) Product Life Expectancy wi imental Factors Ambient TemperaturefC) Humidity Wind Speed Waterproof Compliance FAA ICAO Options Available LED White and Yellow, White and Green...

Open the catalog to page 8
Heliport Lighting - 9

LED Heliport Inset LightAH-HP- Heliport Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. It could be used as Aiming point light, perimeter light of FATO(Final approach and take-off areas), TLOF (Touchdown and lift-off areas), taxiway, runway, Flight path alignment guidance lighting, etc. The emitting color is green or yellow or white or blue. Compliance • ICAO Annex 14 Volume II Heliports 5.3 • FAA AC 150/5390-2B Heliport Design Guide Features Electrical « • LED as light source saving power consumption and...

Open the catalog to page 9
Heliport Lighting - 10

Dimension Installation Heliport Lighting on roof of building ANHANG TECHNOLOGY SPECIFICATIONS AH-HP-I LED Heliport Inset Light Ugwwiaracteristics Light Source Available Colors Intensity(cd) Flash Characteristics Operation Mode LED Life Experience(hours) Electrical Characteristics Operating Voltage Power(W) Physical Characteristics Body Material Base Material Overall size(mm) Installation size(mm) Weight(kg) Product Life Expectancy Environment} Factors Ambient TemperaturefC) Humidity Wind Speed Waterproof Compliance ICAO Options Available CREE Ultra high intensity LED Green, White, Yellow,...

Open the catalog to page 10

All SHENZHEN ANHANG TECHNOLOGY CO. catalogs and technical brochures