Catalog-Aviation Obstruction Light
24Pages

ANN HUNGsin 1415 Low-intensity L810 Single Aviation Obstruction Light AH-LI-B2 This Low-intensity light is a steady burning aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Compliance • ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Low Intensity Type A / B / E Obstacle Light • FAAL-810 Features Electrical SjSv' • 3 high power CREE LED, make sure LED keep bright while use • Power supply in DC(48V)& AC(110-240VAC), the light could work normally when input 48VDC/110VAC/240VAC • LED power supply board includes short circuit and open circuit protection, Line surge protection by metal oxide varistor Physical ^\v/ • Bird deterrent spike on top • Unique designed PMMA lens for converging light and good transparency • High translucency and anti-UV polycarbonate cover could use 3-5years without yellowing • UV protection Powder coated bright yellow color base make better visibility and also long life in harsh environments • Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection • 3/4inch thread hole make pole installation easy • No screw fix type - just twist, the cover will be fixed tightly System design • Built-in photocell for day/night operation(dusk to dawn operation, automatically turn on when background luminance <50cd/m2 • Steady(factory setting)/20FPM/30FPM/60FPM DIP switches on PCB • Surge and lightning protection Optional tlU* - • Alarm contact(NO COM NC)for remote monitoring • Infrared LED for pilot using NVG • GPS sync flashing Application • AH-LI-B2 low-intensity light could be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the height is lower than 45m. • When obstacle object is higher than 45m, AH-LI-B2 can be used with Medium-intensity or high-intensity obstruction light to indicate hazardous obstructions with a steady red safety light. Tel/Fax: +86-755-89589401 Email: sales@annhunq.com Website: www.annhuna.com DOC: DT2020AHLIB2LAOL © Anhang Technology 2016 | All rights reserved

Low-intensity L810 Single” Aviation Obstruction Light AH-LI-B2 Dimension(unit:mm) SPECIFICATIONS Light Source Available Colors Intensity(candela) Horizontal Output(degrees) Vertical Divergence(degrees) Flash Characteristics Operation Mode LED Life Experience(hours) Electrical Characteristics Operating Voltage Power(W) Lightning surge AH-LI-B2 Low-intensity L810 Single Aviation Obstruction Light ANHANG TECHNOLOGY Electrostatic Circuit Protection Physicalll^jnfcteristics Body Material Base Material Mounting Dimension(mm) Weight(kg) Product Life Expectancy Environmental Factors Ambient...

Low-intensity L810 Single Aviation Obstruction Light AH-LI-B2 Configuration Model Flash rate Lens color GPS sync flashing NO SYNC GPS SNYC Used alone Used with controller Remark: The first line is the factory setting if no special request. Tel/Fax: +86-755-89589401 Email: sales@annhung.com Website: www.annhung.com DOC: DT2020AHLIB2LAOL © Anhang Technology 2016 | All rights reserved

Aviation Obstruction Light AH-LI-D2 This LED Low-intensity Double light is a steady burning (20/30/60fpm is adjustable) aviation obstruction light designed for marking top of obstacle that do not exceed 45 meters in height. Main-standby mode ensure the obstacle is always marked even one light fail. Compliance • ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Low Intensity Type A / B /E Obstruction Light • FAAL-810 • CREE LED, make sure LED keep bright while use for long time • Power supply in DC(48V)& AC(110-240VAC), the light could work normally when input 48VDC/110VAC/240VAC •...

LED Low-intensity L810 Double Aviation Obstruction Light v AH-LI-D2Dimension(mm) Flat surface mounting is optional ANHANG TECHNOLOGY Tel/Fax: +86-755-89589401 Email: sales@annhunq.com Website: www.annhunq.com DOC: DT2020AHLID2LAOL © Anhang Technology 2016 | All rights reserved

LED Low-intensity L810 Double Aviation Obstruction Light AH-LI-D2 Configuration Mod el Power input Light source Flash rate Lens color Used alone Used with controller Remark: The first line is the factory setting if no special request. ANHANG TECHNOLOGY Tel/Fax: +86-755-89589401 Email: sales@annhung.com Website: www.annhung.com DOC: DT2020AHLID2LAOL © Anhang Technology 2016 | All rights reserved

LED Medium-intensity Type B L864 Aviation Obstruction Light V AH-MI-B2 This LED Medium-intensity Type B L864 Aviation Obstruction Light flashing red color, designed for marking top of obstacle which height is more than 45meters. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption. X Compliance • ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium ^ Intensity Type B Obstruction Light...

ANHANG TECHNOLOGY LED Medium-intensity Type B L864 Aviation Obstruction Light AH-MI-B2 SPECIFICATIONS ^jJgmCharacteristics Light Source Available Colors Intensity(cd) Horizontal Output(degrees) Vertical Divergence(degrees) Flash Characteristics Operation Mode LED Life Experience(hours) Electrical Characteristics Operating Voltage Instantaneous power(W) Average Power(W) Lightning surge Electrostatic Circuit Protection PhysicaljChliracteristics Body Material Base Material Mounting Dimension(mm) Weight(kg) Product Life Expectancy Environmental Factors Ambient Temperature(C) Storage...

LED Medium-intensity Type B L864 Aviation Obstruction Light AH-MI-B2Configuration Model Remark: The first line is the factory setting if no special request. ANHANG TECHNOLOGY Tel/Fax: +86-755-89589401 Email: sales@annhuna.com Website: www.annhuna.com DOC: DT2020AHMIB2MAOL © Anhang Technology 2016 | All rights reserved