Technical Data Sheet Synthetic grease for aircraft AeroShell Grease 22 is a versatile advanced general purpose grease composed of a synthetic hydrocarbon oil and clay thickener, with outstanding performance characteristics. Appropriate additives are included to achieve the necessary oxidation and corrosion resistance, anti-wear properties and load carrying properties. The useful operating temperature range is -540C to +1770C. • AeroShell Grease 22 is especially recommended for use wherever severe operating conditions are encountered as in high bearing loads, high speeds, wide operating temperature range, and particularly where long grease retention and high resistance to water washout are required. • The wide range of applications include aircraft wheel bearings, engine accessories, control systems, actuators, screw-jacks, servo mechanisms and electric motors, helicopter rotor bearings, instruments, airframe lubrication, hinge pins, static joints, landing gears. • AeroShell Grease 22 contains a synthetic hydrocarbon oil and should not be used in contact with incompatible seal materials. • Russian : Analogue of CIATIM 201 and 203, VNII NP 207, ERA (VNII NP 286M) and ST (NK-50) • Joint Service Designation : XG-293 For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.

These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics may occur. This product is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from https://www.epc.shell.com...