A320B737 general aircraft towbar

Product catalog summary

Overview: This document provides technical specifications and operational instructions for the A320/B737 general aircraft towbar.

Technical Specifications:

Dimensions: 5.2m (length) x 0.7m (width) x 0.8m (height)
Traction Capacity: 10 tons
Features: Equipped with a brake device
Compatibility: Upper part connects with B-737 aircraft, lower part connects with A320 aircraft

Operation Instructions:

Preparation: Carefully read the instruction manual before use and strictly follow the guidelines.
Operation Steps:
1. Position the towbar at the aircraft's front wheel. Connect the towbar's front traction groove with the aircraft wheel shaft and lock the fork plate to secure it.
2. Adjust the height of the towbar using the hand wheel of the lifting mechanism to ensure a firm connection between the rear traction ring and the tractor. Lift the towbar's walking wheel off the ground.
3. Start the tractor to move the aircraft to the designated location.
4. After use, remove the fork plate, adjust the lifting mechanism to lower the towbar's walking wheel to the ground, disconnect the front wheel axle from the traction head, and remove the towbar.

Catalog excerpts

A320/B737 general aircraft towbar Pictures and technical parameters operation instructions 一、Pictures 二、technical parameter 1. Dimensions (length X width X height): 5.2mX0.7mX0.8m 2. Traction: 10t 3. Comes with brake device 4. The upper part is connected with the B-737 aircraft, and the lower part is connected with the A320 aircraft 3. Operation Instructions 1. How to use: Read the instruction manual carefully before use, and operate in strict accordance with the instruction manual. 2. Operation: ① . Push the mop to the position of the front wheel of the aircraft, connect the front traction groove of the mop head with the a

Open the catalog to page 1

wheel shaft, and lock the fork plate to prevent it from falling off. ②. Rotate the hand wheel of the lifting mechanism to adjust the height of the main body of the mop, so that the rear traction ring and the tractor are firmly connected, and then rotate the lifting mechanism to make the walking wheel of the mop fully separate from the ground. Start the tractor and push the aircraft to the designated location. ③ After use, pull out the fork plate, rotate the lifting mechanism, make the mop walking wheel fully contact with the ground, make the front wheel axle disconnect from the traction head,...

Open the catalog to page 2