Shanghai Jianping Dynamic Balancing Machine Manufacturing Co., Ltd. Engine Tailshaft 本机是一种专门用于检测和校正航空发动机尾轴（或类 似旋转部件）动平衡的设备。 通过高精度传感器（如振动传感器或激光传感器）采集 尾轴旋转时的振动数据，根据检测结果，指导用户通过 增减配重或调整尾轴结构来消除不平衡。 Crankshaft Double-Station Automatic Balancing Machine This machine is a specialized equipment for testing and correcting the dynamic balance of aero-engine tail shafts (or similar rotating parts). It collects the vibration data when the tail shaft rotates through high-precision sensors (such as vibration sensors or laser sensors), and according to the inspection results, it guides the user to eliminate the imbalance by increasing or decreasing the counterweights or adjusting the structure of the tail shaft. Brief Introduction 本机广泛应用于汽车单缸、双缸、三缸、四缸及其以上 曲轴平衡修正。 本机采用上海剑平新技术，工件从平衡测量、角度定位、 钻削去重及复测，实行自动化，具有操作简洁，应用方 便，精度高的特点，可连接产品生产线实现自动化生产， 适用于批量生产。 Engine Tail Shaft Balancing Machine This machine is widely used in the unbalance correction of single, double, three, four cylinders and above cylinders crankshaft . Helicopter Drive Shaft This machine adopts the new technology of Shanghai Jianping, the workpiece is automated from balance measurement, angle positioning, drilling and de-weighting and re-measurement, which has the features of simple operation, convenient application and high precision, and can be connected to the product production line to realise automated production, suitable for mass production. Drill Hole 发动机尾轴平衡机 Engine Tailshaft Balancing Machine 主要用于测量发动机尾轴的不平衡量，并根 据测量结果对尾轴进行校正，以达到改善尾 轴旋转时的