5000
5000
- Material: Stainless steel
- Protection Class: IP65, with options up to IP68
- Design: Sturdy and easy to install
- Cable Length: Standard 6 m, customizable upon request
- Combined Error (Non-linearity + Hysteresis): 0.25% to 2% F.S.
- Repeatability Error: Less than ±0.25% F.S.
- Creep Error over 30 min: Less than ±0.3% F.S.
- Zero Shift after Loading: Less than ±0.5% F.S.
- Temperature Range: Compensated (-10°C to +45°C), Service (-25°C to +70°C), Storage (-50°C to +85°C)
- Temperature Coefficient: Sensitivity and Zero Signal less than ±0.2% F.S./10°C
- Nominal Sensitivity: ±0.5 to ±1.5 mV/V
- Input/Output Resistance: 350 ± 2 ohms
- Insulation Resistance: Greater than 5000 Mohms
- Reference Excitation Voltage: 10 VDC
- Permissible Excitation Voltage: 3 to 12 VDC
- Safe Load Limit: 150% to 300% F.S.
- Breaking Load: Greater than 300% to 1000% F.S.
- Permissible Dynamic Loading: 50% to 100% F.S.
- Static Lateral Force Limit: 100% to 200% F.S.
- SL - FORCE: Force measurement on cylinders, industrial weighing, winches monitoring, agriculture machinery, general machinery, test benches.
- SL - HOIST: Hoisting devices and crane security with load limitation electronics.
- SL - LIFT: Load limitation for elevators and cable cars, rigging of theater equipment.
Catalog excerpts
Our model 5000 is designed to measure a force or constraint, without any change to the mechanical structure, simply by replacing the clevis pin with our custom-made load pin. OO CO S O o o LO ~a5 "O o Features o Material: stainless steel o Protection class: IP65 (up to IP68: see options) o Sturdy design o Easy to install o Complete range of CE certified electronics, load limiters and displays available for hoisting applications and lifts o Cable length: 6 m (other lengths available on request) Most popular options Y Exi ft’ SENSY's load cells 5000 are perfectly designed for the following applications: Amplified output SL - FORCE: - Force measurement on cylinders, industrial weighing / Winches monitoring, agriculture machinery, general machinery, test benches. SL - HOIST: Hoisting devices and crane's security in combination with a load limitation electronic, SL - LIFT: - Load limitation for elevators and cable cars / Rigging of theater equipment. Typical range of accuracy, depending on design and dimensions. Specifications subject to change without notice.
Open the catalog to page 1
TECHNICAL DRAWINGS: CUSTOM-MADE LOAD PINS 5000 > TECHNICAL SPECIFICATIONS Load pins range LOAD PIN DESIGN CONFIGURATOR https://www.sensy.com/en/load-pins-configurator/load-pin https://www.sensy.com/en/load-pins-configurator/load-pin-design Load-diameter relationship Suitable dimensions *: Subject to SENSY analysis Mechanical dimensions greasing hole
Open the catalog to page 2
TECHNICAL DRAWINGS: CUSTOM-MADE LOAD PINS 5000 > OPTIONS Configuration Example: C: Connector B: Cable entry: 180° P: Cable gland B: Cable entry: 180° P:Cable gland A:Cable entry : axial Service temperature range Immersion time: Immersion depth: Standard temperature range -20°C Common (YELLOW) Dual bridge circuit Biaxial load pin, directions X and Y IECEX/ ATEX (BROWN) (GREEN) Exc.+ (BROWN) Load direction Exc.+ Sig.+ Temperature range available (option) Intrinsically safe Output signal D:Fixing plate: 90° N:Position code Cable gland H: Fixing plate: 0° C: Position code H: Fixing plate: 0° N: Position...
Open the catalog to page 3
TECHNICAL DRAWINGS: CUSTOM-MADE LOAD PINS
Open the catalog to page 4All SENSY LOAD CELLS S.A. catalogs and technical brochures
593 series3 Pages
296 series6 Pages