9.6m Single Concealed Floor System
2Pages

9.6m Concealed Floor System 9.6m Concealed Floor System Not approved for sale in the EU Hidden antennas provide invisible anti-theft protection for wide store exits. The discrete 9.6m Concealed Floor System delivers merchandise protection for wide exits or open architecture requirements. The system emits an audible alert to notify store associates if protected merchandise passes through the detection zone. Providing up to 9.6m (31.5ft) of coverage with a detection height of up 1.2m (4ft) to maximize customer flow, the installation of this concealed system minimally impacts store operations by eliminating the need for sub-floor excavation. Its thin, flat antenna simplifies the installation process even further by allowing the antenna to mount directly onto the concrete floor, then covering the antenna with flooring material. It is the ideal detection system for locations where pedestal systems or floor excavation is unwanted or prohibited. Through system configuration, "Tags-too-Close" is an offered feature developed to help store associates better manage merchandising of tagged goods at the front of the store. This feature helps reduce unnecessary and costly service calls and decreases nuisance alarms to enhance the shopper experience. Another system-configured feature is Jammer Detection. This software triggers a pedestal alarm as soon as an electronic signal from a Jammer device is detected; helping eliminate the threat of would-be thieves using this method. This system provides in-store EAS and Traffic Intelligence when connected to a compatible data management device to better manage store operations. Retailer Values // Delivers superior shoplifting protection for wider exits to help maximize customer flow and optimize merchandising floor space // Flooring material is installed directly over thin antenna to eliminate costly excavations // Provides an invisible, yet effective, AM EAS solution where pedestal systems are unwanted or prohibited // "Tags-too-Close" feature helps reduce unnecessary and costly service calls and helps manage merchandising of tagged products at the store front // Electronics are located in the primary pedestal to help reduce install and maintenance costs // When connected to a compatible data management device, this system provides in-store EAS and Traffic Intelligence to better manage store operations Product Compatibility Sensormatic AM Sensor Ultra-Exit Pedestals Ultra-Post Self-Contained Pedestals Pro-Max Ranger Receivers Satellite Receivers Amorphous Core Receiver Stereo Overhead Traffic Sensor Mono Overhead Traffic Sensor Local Device Manager II (LDM II) UltraLink Digital Remote Alarm Power Supply Primary Input 100-120VAC, 200-240VAC 50-60Hz Primary Power Fuse 5A slo-blow Current Draw 5.0A@120VAC 3.1A@230VAC Retail Solutions © 2015 Tyco Retail Solutions. All rights reserved. TYCO RETAIL SOLUTIONS and SENSORMATIC are marks and/or registered marks. Unauthorized use is strictly prohibited.

9.6m Concealed Floor System Not approved for use in CE Acousto-Magnetic (AM) Power Supply (con't) Input Power 440W@120VAC with 2 or 4 ants. 440W@230VAC with 2 or 4 ants. Burst Repetition Rate 9-conductor, shielded, plenum-rated Environmental Constraints Operating Temperature 0°C to 50°C (32° to 122°F) Relative Humidity 0 to 90%, non-condensing Enclosure IPX0 This product is ONLY approved for use at elevations up to 3,200m (10,500ft) Declarations EMC 47 CFR, Part 15 RSS 210 Safety (second edition) IEC 60950-1 This product is in conformity with RoHS II Directive 2011/65/EU and...