Syntester

Product catalog summary

Overview
The Syntester is a device designed to simulate a constant helicopter engine vibration level for calibration checks. It is robust, compact, and allows for easy control of tolerance limits, ensuring the good condition of cables and enabling training without the need for an actual helicopter.

Technical Specifications

Speed Range: 3000 to 60,000 rpm
Tachometers Signal Frequency: 400Hz to 8KHz for NG and TL (2000), 400Hz to 8KHz for NG and 6.25Hz to 125Hz for TL (5000)
Vibratory Speed: 15 mm/s constant from 3000 to 60,000 rpm
Test Output Level: 480 mV AC in calibration mode
Outputs: 1 NG phonic output, 1 NTL phonic output, 1 accelerometer output for Synthester 2000, 2 for Synthester 5000, and 1 charge amplified accelerometer output
Run Up/Down Duration: 25s +/-5s
Power Supply: 5Vdc (2000), 28Vdc (5000)
Dimensions: 200 x 105 x 61mm
Weight: 750g
Climatic Conditions: Service temperature: -20 to +55°C, Storage temperature: -40 to +60°C, Humidity: 5 to 90%

Purpose and Functionality
The Syntester is designed for end-users to verify the tolerance of their Syntham and main peripherals. It simulates electrical signals from a helicopter engine, generating phonic well pick-up signals and accelerometer signals for a constant engine vibration level. The SYNTESTER 2000 is compatible with the SYNTHAM 2000, and the SYNTESTER 5000 with the SYNTHAM 5000.

Operating Modes

Calibration: 30,000 rpm, 15 mm/s
Down: 3,000 rpm, 15 mm/s
Up: 60,000 rpm, 15 mm/s
Run Up: from 3,000 to 60,000 rpm, 15 mm/s
Run Down: from 60,000 to 3,000 rpm, 15 mm/s

Catalog excerpts

Simulates a constant helicopter engine vibration level for calibration check Aims Syntester has been designed to allow end-user to verify by his own means that his Syntham and the main peripherals are in tolerance. The tests conducted allow the checking of the full acquisition path as well as the digital calculations. Syntester simulate the electrical signals provided by an helicopter engine. It generates « phonic well » pick up signals and accelerometers signals for a constant engine vibration level. Enabling training elsewhere other than using a helicopter Easy way to control tolerance is within the limits. Checking the good condition of the cables. SYNTESTER 2000 is used with the SYNTHAM 2000 and SYNTESTER 5000 is used with the SYNTHAM 5000. Engine speed (rpm) 30,000 3,000 60,000 from 3,000 to 60,000 from 60,000 to 3,000 Non contractual leaflet. The manufacturer reserves the right to modify technical features

Open the catalog to page 1

All SEMIA catalogs and technical brochures

Absorber Tuning Unit
2 Pages
Helivib
2 Pages
SYNTHAM 2000
2 Pages
Syntham 5000
4 Pages
Accelerotester
2 Pages