1. Catalogs
  2. SEKISUI Polymer Innovations
  3. KYDEX®110 Metallic fire-rated sheet

KYDEX®110 Metallic fire-rated sheet

KYDEX®110 Metallic fire-rated sheet

KYDEX®110 Metallic fire-rated sheet

Product catalog summary
Introduction
KYDEX® 110 is a metallic fire-rated sheet known for its toughness, durability, and versatility in thermoforming. It offers excellent formability, rigidity, breakage resistance, chemical resistance, and fire retardancy.

General Information
This thermoplastic sheet is available in various metallic colors and is recognized by Underwriters Laboratories for UL Std 94 V-0, 5V.

Suggested Applications
  • Aircraft Interiors
  • Exhibits and Displays
  • Kiosk Housings
  • Store Fixtures
  • Medical Housings
  • Office Furniture
  • Miscellaneous Applications

Features
  • Suitable for deep or hard-to-form parts with good finished detail
  • More rigid than most thermoplastics, reducing deformation under load
  • High chemical resistance
  • Recognized for fire safety standards in all thicknesses and colors
  • Excellent forming properties with uniform wall thicknesses
  • Easy machining and fabricating using conventional methods
  • Passes FAA Vertical Burn Testing according to FAR 25.853 (a) (i)+(ii)

Environmental and Safety Considerations
SEKISUI SPI emphasizes safety, health, and environmental protection in the manufacturing, transportation, storage, use, disposal, and recycling of its products. For more information, contact their Technical Service department or visit their website.

Physical Properties
  • Specific Gravity: 1.31
  • Tensile Strength: 45 MPa (6,500 psi)
  • Flexural Strength: 76 MPa (11,000 psi)
  • Modulus of Elasticity: 2,450 MPa (356,000 psi)
  • Notched Izod Impact Resistance: 128 J/m (2.4 ft-lbs/in)
  • Heat Deflection Temperature: 73.9°C (165°F)
  • Flammability: UL Standard 94 V-0, 5V
  • Surface Burning Characteristics: ASTM E-84 Class 1/A
  • Vertical Burn Tests: Pass

Disclaimer
The information provided is based on typical values and is intended as a guide for engineering design. Users should conduct their own tests to determine product suitability for specific applications. The products are sold without warranty of merchantability or fitness for a particular use, except as provided in standard terms and conditions of sale.
See more

Catalog excerpts

KYDEX®110 Metallic fire-rated sheet-1

KYDEX THERMOPLASTICS Technical Data SheetKYDEX®110 Metallic fire-rated sheet © 2014 SEKISUI POLYMER INNOVATIONS, LLC. All rights reserved. KYDEX is a registered trademark of SEKISUI POLYMER INNOVATIONS, LLC. |

 Open the catalog to page 1
KYDEX®110 Metallic fire-rated sheet-2

KYDEX THERMOPLASTICS Technical Data SheetKYDEX®110 Metallic fire-rated sheet Physical Properties Customer Service 6685 Low St, Bloomsburg, PA 17815 USA Phone: 800.325.3133, +1.570.389.5810 Outside the US: +1.570.389.5814 Fax: 800.452.0155, +1.570.387.7786 Email: [email protected] technical Service Phone: 800.682.8758 Fax: +1.570.387.8722 Outside the US: +1.570.387.6997 [email protected] Because we cannot anticipate or control the many different conditions under which this information and our products may be used, we do not guarantee the applicability of the accuracy of this information...

 Open the catalog to page 2
Related Searches
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.