Introduction
ALLEN® 2035LG is a medium impact ABS sheet with a low gloss finish, designed for general purposes.

General Information
The product has achieved a UL94 HB rating at 0.060 inches (1.52mm) and complies with Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302).

Suggested Applications

• Medical Equipment Housings
• Food Equipment Trays & Housings
• Displays
• Signs

Features

• Custom color matching
• Good forming and fabricating properties
• Edge trim easily used in future orders
• Low gloss finish

Environmental and Safety Considerations
SEKISUI SPI emphasizes safe manufacturing, transportation, storage, use, disposal, and recycling of its products. For safety data sheets, contact the Technical Service department.

Physical Properties
Users should conduct their own tests to determine product suitability. Typical values are provided for guidance under ideal laboratory conditions. The product is sold without warranty of merchantability or fitness for a particular use.

Key Physical Properties

• Specific Gravity: 1.05 g/cc (ASTM D792)
• Gloss, 60° Angle: 50-70% (ASTM D523)

Mechanical Properties

• Tensile Strength: 5,200 psi (35.8 MPa) (ASTM D638)
• Flexural Modulus: 290,000 psi (1,999.4 MPa) (ASTM D790)
• Flexural Strength: 8,600 psi (59.2 MPa) (ASTM D790)
• Notch Izod Impact, 73°F: 4.9 ft-lbs/in (261 J/m) (ASTM D256)
• Notch Izod Impact, 0°F: 2.4 ft-lbs/in (128 J/m) (ASTM D256)

Thermal Properties

• Heat Deflection Temperature (HDT) @66 psi: 200°F (93.4°C) (ASTM D648)
• Heat Deflection Temperature (HDT) @264 psi: 190°F (87.8°C) (ASTM D648)
• Mold Shrinkage: 0.004-0.007 in/in (ASTM D955)

Flammability
UL Standard 94 HB @ 0.060 in (1.52mm) and passes Motor Vehicle Safety Standard Component Recognition.

Disclaimer
SEKISUI SPI does not guarantee the applicability or accuracy of the information provided. Users are responsible for determining the suitability of the product for their purposes. The product is not intended for use as a heat-resistant surface.