RBC-D4E
2Pages

Product Overview The RBC-D4E camera is a ruggedized and compact High Definition color digital video camera. The camera is well protected inside an environmentally sealed aluminum housing, finished in Lusterless Desert Tan and with a scratch resistant sapphire window. The housing provides complete EMI protection, and can “breathe” through a humidity filter, minimizing maintenance requirements during long term storage. Ruggedized Puck Camera The camera has a dual concurrent legacy analog (NTSC/PAL) video output, which allows the cameras to support legacy installations with a path to digital high definition video output. The concurrent SDI video output supports SMTPE standards supporting 1080p60, 1080p50, 1080p24, 1080i60, 720p60, 720p30 digital video output modes. Typical Applications • Suitable for both water based, ground and air vehicles • Remote Mission viewing • Mission Recording and Analysis Features and Electrical Specifications • • • • • • • • • • • Sony IMX265 Electronic Global Shutter sensor. SDI digital output supporting 3G-SDI (3.0Gbps) and HDSDI (1.5 Gbps) Lens mount supporting a wide array of C and CS mount lenses Primary SDI digital video output SMPTE 424M 3Gbps SDI video output support ing 1080p30fps video SMPTE 292M 1.5 Gbps SDI video output support ing 1080p30 video output secondard video output NTSC or PAL selectable video output 12V DC power input 3.5-4.0 W power consumption depending on video output mode 5.5mm lens - other lens options available Environmental Specifications* • • • • • Storage Temperature -55°C to +80°C Storage Humidity 5% to 95% RH, non-condensing Operating Temperature -40°C to +70°C Operating Humidity 5% to 95% RH, non-condensing Altitude -15,000 to 60,000 ft+ *Estimates based on similar products, which have been tested SEKAI Electronics 38 Waterworks Way,

NOTICE THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF SEKAI ELECTRONICS INC. NEITHER RECEIPT NOR POSSESSION THEREOF CONFERS ANY RIGHT TO REPRODUCE, USE OR DISCLOSE IN WRITING OR IN PART, ANY SUCH INFORMATION WITHOUT WRITTEN AUTHORIZATION FROM SEKAI ELECTRONICS INC. PRODUCTION RELEASE NOTE: UNLESS OTHERWISE SPECIFIED 1. WEIGHT: NOT TO EXCEED 425 GRAMS (0.94LB). FINISH: LUSTERLESS DESERT TAN PER FED-STD-595 #3346 OR PANTONE NO. DS 40-7C OR EQUIVALENT. SEE TABLES BELOW FOR CONNECTOR AND PINOUT INFORMATION. CONNECTOR J2 TNC RECEPTACLE, 75 OHM CONTACT NUMBER FUNCTION 1 VIDEO (SDI) 2 GND...