SEFELEC 56-D
1 / 4Pages

Product Brochure The SEFELEC 56-D is the new generation EATON dielectric meter (hipot and insulation test) based and controlled by ARM-Dual Core and DSP technologies providing the best stability and repeatability. SEFELEC 56-D The EATON Dielectric Meter The high accuracy and measurement speed are suitable for quality control or incoming inspection departments. The sequence mode makes the SEFELEC 56-D easier to use and integrate in a control or a test-bench. SEFELEC 56-D: features and benefits: The new SEFELEC Series HMI, with its 7” dual-touch TFT screen, offers simple and intuitive operations. Insulation measurement up to 2TΩ at 1000 VDC Adjustable voltage from 10 to 1000 VDC by steps of 1V Up, Steady, Down Multi-ramps mode (hipot test) Bus CAN for external additional modules (Scanners) SIL2 double safety loop 7” TFT Multi touchscreen 16 million colors Automatic measurement range selection Sequence mode to combine several successive tests (i.e.: Insulation / Hipot / Insulation) Programmable test ramps for programming, tests and results display ARM-Dual core control & Nand 3D technologies inside for more accuracy, stability and repeatability DSPs speeds up measurements and production tests Large internal memory for configurations and test results storage IEC 61010-2-034 full compliance, specific safety standard for insulation and dielectric s

SEFELEC 56-D : Dielectric Meter - overview High voltage output Hipot and insulation functions FRONT PANEL Measurement stop Measurement start Measurement return Removable panel for rear measurement connections options REAR PANEL RS232 or IEEE488 USB CAN port to other SEFELEC devices PLC / 0-10V Wide range mains voltage 100-240V Safety loop interlock DIMENSIONAL DIAGRAMS Front view Left side view Rack-Mount operation requires SEFA-KR adaptor. SEFO-5XREAR option provides measurement connectors on the back plane.

Measurement parameter Test ramp status Thresholds & Ranges configuration Setup & files management Measurement values Permanent Measurement mode SEFELEC 56-D : Accessories & Options Accessories SEFA-TE65-02 111 High voltage probe and test lead length. 2 meters SEFA-CO175-02 111 Return lead with 4mm termination - length 2 metres. High voltage lead without probe for hardwire connection, length 2 meters 19” rackmount adaptors for SEFELEC 5x series Green / red safety lamp (1) Models also available with leads 5m and 10m long. Part numbers as follows : Remote controls connection module 2TQ...

SEFELEC 56-D TECHNICAL SPECIFICATIONS General Specifications Mains Mains protection Input Power Temperature range Relative humidity Dimensions & Weight 100-240 VAC ±10 % 50 to 60 Hz / single phase Temporized double fuse T10AH 250V 700 VA max. Specified accuracy after 1/2 hour warm-up and RH<50 % Up to 2 000 m 80 % max. @ 31°C Height Width Depth Dielectric Strength Function (hipot) Voltage range Voltage generator accuracy DC voltage ripple Max D.U.T. capacitance Voltage measurement accuracy Short-circuit max. current Default detection modes AI detection mode current range Min/Max detection...