Mesh Belt Conveyor Furnaces
4Pages

Product Bulletin Mesh Belt Conveyor Furnaces Continuous Copper Brazing, Silver Brazing and Annealing up to 2100°F/1150°C If you produce light or medium weight parts where low cost, high volume production is required; a SECO/WARWICK mesh belt conveyor furnace will process your work efficiently and economically, typically free of oxidation and discoloration with less scale than other processes. The furnace is particularly well suited to continuous production line operations accepting parts ready for heat processing and discharging them ready for assembly or packaging. Because the furnace can be utilized for many heat Figure 1 - Mesh Belt Conveyor systems used for copper brazing in commercial heat treat facility processes, it is widely applied for parts or assemblies used in volume production industries such as automotive, home appliance, electronics, aircraft and hardware. Copper Brazing Strong leak tight inexpensive joints can be made in steel by copper brazing, when the joint is properly designed. In volume production, copper brazing of joints is generally much less expensive than silver brazing, soldering, arc welding, seam welding or spot welding. Brazing flux is not required because the furnace atmosphere cleans the work. Silver Brazing Silver brazing will produce strong, leak-tight joints with almost any metal or combination of metals. With silver brazing, an assembly can be built up in a series of brazes, using a lower temperature brazing material for each successive braze. Annealing Annealing in a protective atmosphere can cut cost and improve quality by eliminating or minimizing subsequent cleaning operations. The annealing process can be used as a cleaning operation before further processing. Parts or assemblies can be brought out of the furnace hot enough to form a light and tight protective bluing on the product. www.secowarwick.com For more information or to request a quote, e-mail info@secowarwick.com

MESH BELT FURNACE DIMENSIONS, DATA & RATINGS • Available In R Dfeon Res stor Heating Elements ft ) Production &a*ed on 3 6 pou^ae per square foot of belt at 2050 f. |2 ) Kw rating depends on zone arrargement and poee* supp’y. 13.) Cfb based on max murr door opening and Curtains at both ends Ceramic silicon carbide type heating elements mounted above and below the belt provide efficient, uniform heating. They can be easily changed while the furnace is at temperature. Furnaces may also be supplied with resistance heating ribbon elements. A tap changing transformer permits varying the voltage...

Product Bulletin Cooling Chamber The gas-tight, water cooled chamber is of double wall construction with water circulating on all four sides. Thermostatic controls automatically adjust water flow for optimum cooling and minimum water consumption. Multiple zones of water temperature control are provided to adjust cooling rates for different loads. Removable covers simplify periodic cleaning. Mesh Belt and Belt Drive A 10:1 ration variable speed drive unit with widely adjustable belt speeds allows the treatment of different thicknesses of materials with varying temperature requirements. The...

Product Bulletin and minimize infiltration of outside air. Exhaust hoods at each end of the furnace carry away waste atmosphere and products of combustion. Industrial Services A wide range of services are available for our equipment. These include rebuild projects, field service, spare parts, equipment supply, control and combustion upgrades, and fabrication services. As a result of these services, we have provided our customers improved performance, lower emissions, better efficiency and enhanced product temperature uniformity. About SECO/WARWICK The SECO/WARWICK Group is one of the...